JBL
JBL Professional All Weather AWC62 6.5" 2-Way Indoor/Outdoor Speaker
A compact 6.5" two-way coaxial speaker built for indoor and outdoor installations with 120 W RMS power handling
- ChannelsAWC62
- Driver Units120 W
- Frequency Response70 Hz
- Nominal Impedance8 Ohms
- Sensitivity120 dB
- Remote ControlJBL Professional
- Weather-resistant build handles outdoor installations
- 5" coaxial driver delivers full-range sound
- 120 W RMS power supports speech and music
- 70 Hz low-frequency response extends bass
- 70 V transformer simplifies distributed audio systems
Compact 6.5" all-weather loudspeaker
The JBL Professional AWC62 is a 6.5-inch two-way coaxial loudspeaker built for indoor and outdoor installations. Its weather-resistant enclosure handles moisture, UV exposure and temperature swings so installers can mount it in stadiums, water parks, pool areas or covered patios without a separate shelter. The light-grey finish blends into architectural surroundings while the bare-wire terminals speed up wiring on site.
70 V line practical limits
The speaker is rated for 70 V distributed-line systems, which lets a single amplifier run long cable runs to multiple units without heavy gauge wire. Power taps are fixed at the factory, so the installer cannot adjust wattage per zone after mounting. The 8-ohm nominal impedance works with standard 70 V transformers, but the fixed tap means each location draws the same preset power regardless of local SPL needs.
120 W RMS power handling decides fit
The driver handles 120 W RMS continuous pink-noise power, setting the maximum SPL the cabinet can sustain without compression or damage. System designers must match the amplifier channel to this rating; an undersized amp will clip before the speaker reaches its output potential, while an oversized amp risks thermal failure if driven hard. The 175 W peak figure only covers short transients and cannot be used for continuous sizing.
Highlights
- Weather-resistant build handles outdoor installations
- 5" coaxial driver delivers full-range sound
- 120 W RMS power supports speech and music
- 70 Hz low-frequency response extends bass
- 70 V transformer simplifies distributed audio systems
Specifications
| Brand | JBL |
|---|---|
| Channels | AWC62 |
| Driver Units | 120 W |
| Frequency Response | 70 Hz |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 120 dB |
| Remote Control | JBL Professional |
Questions about this item
Should I choose the 6.5" AWC62 or a larger model for my patio?
The AWC62 uses a 6.5-inch coaxial driver in a compact cabinet rated for 120 W RMS and 175 W PMPO, so it fits tight outdoor spaces while still delivering full-range output.
What does the 120 dB sensitivity figure mean once the speaker is mounted?
At 120 dB sensitivity the AWC62 produces very high volume from modest amplifier power, giving clear speech and music coverage across a typical patio or pool area without needing a large amp.
How does the 8-ohm nominal impedance and 70 V rating affect wiring?
The 8-ohm load works with standard amplifier channels, while the 70 V transformer taps let you run long cable runs to multiple AWC62 units on a single distributed line.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



