JBL
JBL Control 67 P/T 75 W RMS 300 W PMPO 2-way Black home audio speaker
A 2-way indoor speaker with a 6.5" woofer and 1" dome tweeter delivering 75 W RMS power and 58 Hz bass response
- Driver Units1" Dome 1" Dome Tweeter 6.50" Polypropylene Woofer 6.50" Pol
- Frequency Response58 Hz
- Nominal Impedance8 Ohms
- Sensitivity90 dB
- ColorBlack
- Deep bass extension down to 58 Hz
- 75 W RMS power for clear, loud playback
- 2-way crossover with 1" dome tweeter and 6.5" polypropylene woofer
- 90 dB sensitivity for efficient amplification
- 3" diameter enclosure fits standard installs
JBL Control 67 P/T two-way speaker
The JBL Control 67 P/T is a two-way home audio speaker designed for listeners who want extended bass and high-fidelity output from a single enclosure. Its 165 mm polypropylene woofer and 1-inch dome tweeter combine with a large cabinet to serve living-room or small-venue installations.
Practical limits of the 8-ohm passive interface
As an 8-ohm passive design rated at 75 W RMS and 300 W PMPO, the speaker requires an external amplifier that can deliver clean power within those limits. Sensitivity of 90 dB means moderate amplifier output reaches comfortable listening levels, yet the fixed crossover and impedance curve prevent bi-amping or active DSP correction without hardware changes.
Capacity and headroom for bass and coverage
Frequency response spans 58 Hz to 18 kHz, so the cabinet reproduces deep low-end without a separate subwoofer in modest rooms. The Radiation Boundary Integrator narrows dispersion, letting fewer units cover a wider area, but output compresses above 75 W continuous and the 58 Hz low-frequency limit leaves the lowest octave unreproduced.
Highlights
- Deep bass extension down to 58 Hz
- 75 W RMS power for clear, loud playback
- 2-way crossover with 1" dome tweeter and 6.5" polypropylene woofer
- 90 dB sensitivity for efficient amplification
- 3" diameter enclosure fits standard installs
Specifications
| Brand | JBL |
|---|---|
| Driver Units | 1" Dome 1" Dome Tweeter 6.50" Polypropylene Woofer 6.50" Polypropylene |
| Frequency Response | 58 Hz |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 90 dB |
| Color | Black |
Questions about this item
Which power rating should I use when matching this speaker to my amplifier, the 75 W RMS or the 300 W PMPO?
Use the 75 W RMS figure for amplifier matching; the 300 W PMPO is a peak rating and does not represent continuous power handling.
What does the 90 dB sensitivity mean for volume levels in a typical room?
At 90 dB sensitivity, the speaker produces a loud listening level with moderate amplifier power, making it efficient for home or small venue use.
How does the 8 Ohm nominal impedance affect which amplifiers I can use?
The 8 Ohm nominal impedance is compatible with virtually all home and commercial amplifiers, presenting an easy load for stable operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



