JB Industries
JB Industries DV-85N Platinum vacuum pump 3.0 cfm 6 ft cord
A 3.0 cfm vacuum pump reaches 15 micron end vacuum with 1/2 hp motor and 6 ft cord
- 0 cfm displacement speeds system evacuation
- 15 micron end vacuum ensures deep moisture removal
- 1/2 hp motor delivers reliable continuous operation
- Aluminium body and 26 oz oil capacity reduce wear
- 6 ft cord and 30 lb weight allow flexible placement
Purpose-built evacuation pump
The JB Industries DV-85N Platinum is a dedicated refrigeration evacuation pump rated at 3.0 cfm displacement. It reaches a 15 micron end vacuum to ensure moisture and non-condensables are removed from HVAC and refrigeration systems. The unit is designed for technicians who need reliable deep vacuum performance on residential and light commercial jobs.
Electrical and connection requirements
The pump operates on 120V AC at 60 Hz and draws 7.5 amps, so a standard North American outlet and circuit are required. A 6 ft power cord limits placement distance unless an extension cord rated for the load is used. Inlet ports accept both 1/4 in and 3/8 in flare fittings, and a blank-off check valve is included to isolate the pump during leak testing.
Capacity and practical limits
The 26 oz oil reservoir supports extended runs before a change is needed, while the 1/2 hp motor maintains the rated displacement under load. At 30 lb and 14 in by 18 in by 9.1 in, the pump is portable but substantial enough to stay stable on a job site. It is not suited for large industrial systems that demand higher cfm or faster evacuation times.
Highlights
- 0 cfm displacement speeds system evacuation
- 15 micron end vacuum ensures deep moisture removal
- 1/2 hp motor delivers reliable continuous operation
- Aluminium body and 26 oz oil capacity reduce wear
- 6 ft cord and 30 lb weight allow flexible placement
Specifications
| Brand | JB INDUSTRIES |
|---|
Questions about this item
How deep a vacuum can the DV-85N Platinum pull before it stops improving?
The pump reaches a 15 micron end vacuum, so that is the practical limit under sustained evacuation.
What noise, heat or power draw should I expect when it runs all day?
It draws 7.5 A at 120 V AC (60 Hz) from a 1/2 hp motor; the aluminum body dissipates heat, but the supplier gives no decibel rating.
What must I already own to connect and operate this pump?
You need a 120 V AC outlet, 26 oz of vacuum-pump oil, and flare fittings for the 1/4 in and 3/8 in inlet ports.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
