JB Industries
JB Industries CLB-72 HVAC Control Hose 72 In Black
72-inch rubber/Kevlar charging and evacuation hose with brass fittings rated to 800 psi working pressure
- ColorBlack
- 72 in length gives extended reach for charging and evacuation
- Rubber and Kevlar construction provides heavy-duty durability
- 800 psi working pressure supports high-pressure refrigerant work
- 4,000 psi burst pressure adds a strong safety margin
- Brass fittings resist corrosion for reliable connections
HVAC control hose for charging and evacuation
This 72-inch hose is built for refrigerant charging and evacuation tasks in HVAC systems. It uses a single rubber-and-Kevlar line with brass fittings and a straight 1/4-inch female connection. The black hose is rated for 800 psi working pressure and 4,000 psi burst pressure. It suits technicians who need a heavy-duty replacement for routine service work.
Straightforward connection with brass fittings
The 0-degree angle and 1/4-inch female end thread directly onto standard service ports without adapters. Rubber-Kevlar construction resists kinking, but the hose must be inspected for cuts or abrasion before each use. Over-tightening brass fittings can strip threads, so hand-tighten then add a slight turn with a wrench. Store coiled loosely to avoid permanent bends.
Check port size and pressure rating first
Verify that your manifold and service ports accept a 1/4-inch female flare fitting before ordering. Confirm the system's maximum operating pressure does not exceed the hose's 800 psi working limit. Ensure the 72-inch length reaches between your manifold and the unit without stretching. This hose is not intended for high-pressure nitrogen testing or recovery applications above its rated pressure.
Highlights
- 72 in length gives extended reach for charging and evacuation
- Rubber and Kevlar construction provides heavy-duty durability
- 800 psi working pressure supports high-pressure refrigerant work
- 4,000 psi burst pressure adds a strong safety margin
- Brass fittings resist corrosion for reliable connections
Specifications
| Brand | JB INDUSTRIES |
|---|---|
| Color | Black |
Questions about this item
How can I verify the hose is holding pressure after connecting it to my manifold?
Pressurise the system up to the 800 psi working limit and check that the brass fittings and rubber-Kevlar cover show no leaks or bulging.
What comes with the CLB-72 and what must I supply myself?
The package contains one 72 in black charging/vacuum hose with 1/4 in female brass fittings; you will need to provide the manifold gauges and refrigerant.
Should I choose a different length or colour for my application?
This model is offered only in 72 in black; if another length or colour is required, a different part number must be selected.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
