JB Industries
JB Industries CCLS-60 Manifold Hose Set 60 in 1/4 in 45° 800 psi
Three 60-inch rubber/Kevlar hoses with 1/4-inch brass fittings at 45 degrees, rated for 800 psi working pressure
- ColorRed, Yellow, Blue
- Low-loss 1/4 in fittings minimise refrigerant loss
- 45° angled ends ease tight manifold connections
- 60 in length gives flexible reach across work areas
- 800 psi working pressure handles high-side refrigerant loads
- Kevlar-reinforced rubber resists abrasion and kinking
Three-Hose Manifold Set
The JB Industries CCLS-60 manifold hose set contains three 60 in hoses with 1/4 in female connections angled at 45 degrees. Colour-coded red, yellow and blue for quick identification during charging and recovery. Rubber and Kevlar construction with a nitrile cover resists abrasion and refrigerant permeation. Brass fittings provide reliable sealing on manifold gauge ports.
HVAC Technicians Needing Low-Loss Connections
Suits professionals who require a 800 psi working pressure rating and 4,000 psi burst safety margin for modern refrigerants. The low-loss fittings minimise venting when connecting or disconnecting under pressure. Not intended for systems exceeding the rated working pressure or for permanent installation in place of hard piping. Buyers needing different lengths or straight fittings should consider other options.
800 psi Working Pressure Rating
This single specification defines the maximum continuous pressure the hose assembly can safely handle during operation. The 4,000 psi burst pressure provides a 5:1 safety factor above the working limit. Verify that the refrigerant and system pressures stay within this rating before use. Exceeding it risks hose failure and refrigerant release.
Highlights
- Low-loss 1/4 in fittings minimise refrigerant loss
- 45° angled ends ease tight manifold connections
- 60 in length gives flexible reach across work areas
- 800 psi working pressure handles high-side refrigerant loads
- Kevlar-reinforced rubber resists abrasion and kinking
Specifications
| Brand | JB INDUSTRIES |
|---|---|
| Color | Red, Yellow, Blue |
Questions about this item
What is the maximum working pressure before the 800 psi rating becomes the limiting factor under sustained use?
The set is rated for a working pressure of 800 psi, which is the limit that applies during continuous operation.
How much heat do the hoses absorb when refrigerant flows all day through the rubber/Kevlar construction?
The nitrile cover on the rubber/Kevlar hoses resists heat buildup during extended refrigerant flow.
Which manifold gauge sets accept the 1/4 in female 45° brass fittings on these hoses?
The 1/4 in female 45° brass fittings connect directly to standard refrigerant manifold gauge sets with matching ports.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
