JB Industries
JB Industries A32905 Line Piercing Saddle Valve 5/16in OD Pack of 5
Five brass saddle valves pierce 5/16 in lines for CFC, HCFC and HFC refrigerants at 800 psi
- Pierces 5/16 in OD tubing without cutting
- Hardened steel needle resists wear during repeated use
- Rated for 800 psi working pressure
- Compatible with all CFC, HCFC and HFC refrigerants
- Pack of five valves speeds multi-point installs
Brass Saddle Valve for 5/16 in Lines
The JB Industries A32905 is a brass line-piercing saddle valve designed for 5/16 in OD copper tubing. Each pack contains five valves compatible with all CFC, HCFC and HFC refrigerants. Intended for HVAC technicians and service crews who need a quick, permanent tap point without cutting or brazing the line.
Rated to 800 psi Working Pressure
The hardened steel piercing needle and cap create a secure seal rated for a maximum working pressure of 800 psi. Brass and copper construction resists corrosion during normal system operation. No external power or actuation is required, so the valve adds no electrical load or audible noise to the installation.
Replaces Flare or Braze-In Access Fittings
This saddle valve replaces the need for flare fittings or brazed service ports when adding a charging or gauge connection. The jump is worth it on jobs where line cutting is impractical or when a temporary access point must become permanent. Not suited for applications requiring a larger connection than the 1/4 in port provided.
Highlights
- Pierces 5/16 in OD tubing without cutting
- Hardened steel needle resists wear during repeated use
- Rated for 800 psi working pressure
- Compatible with all CFC, HCFC and HFC refrigerants
- Pack of five valves speeds multi-point installs
Specifications
| Brand | JB INDUSTRIES |
|---|
Questions about this item
How do I install the JB Industries A32905 saddle valve on a 5/16 in OD line, and what step is often missed?
Clamp the brass body over the copper tube, tighten the bolts evenly to drive the hardened steel needle through the wall, then attach the cap; the step often missed is torquing both bolts in sequence so the seal seats before pressure is applied.
What maintenance or replacement will the JB Industries A32905 valve need after extended service?
The piercing needle and rubber seal can wear or corrode over time; if refrigerant seepage appears at the saddle, replace the entire valve assembly rather than attempting to reseal the original puncture.
At what pressure limit does the JB Industries A32905 valve reach its maximum rating during sustained use?
The valve is rated for a maximum working pressure of 800 psi, so sustained system pressures approaching that figure represent the first operational limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
