We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White in-ear canal earphones with flat tangle-free cable and inline three-button remote

JAYS

JAYS a-JAYS Four White T00082 In-Ear Canal Earphone 8.6mm 16 ohms 96dB 3.5mm 3.77ft .49oz

SKU CH-ZGZ7-W474X MPN T00082

In-ear canal earphones with an 8.6 mm driver, 16 ohm impedance and a silver-plated 3.5 mm connector for clear sound and tangle-free use

  • TypeIn-Ear
  • ColorWhite
  • Driver Unit8.6mm
  • Frequency Response20Hz-21KHz
  • Input Impedance16 ohms
  • Sensitivity96dB S.P.L. at 1KHz
  • In-ear canal design blocks outside noise with isolating sleeves
  • 6 mm driver delivers 20 Hz–21 kHz frequency response
  • 16 ohm impedance and 96 dB sensitivity suit portable devices
  • Silver-plated 3.5 mm connector resists corrosion for reliable contact
  • TPE-coated flat cable stays tangle-free across 3.77 ft length

Product identity

The JAYS a-JAYS Four T00082 is a white in-ear canal earphone built around an 8.6mm driver with 16 ohms impedance and 96dB sensitivity. It targets listeners who want a lightweight wired option with a silver-plated 3.5mm connector and a flat TPE cable that resists tangling.

Sustained listening behaviour

The canal coupling and JAYS Sound Isolating Sleeves provide passive isolation that remains consistent during long sessions, while the 20Hz-21KHz frequency response maintains tonal balance without fatigue. The 3.77 foot cord length and 0.49 oz weight keep the cable manageable and the earpieces light for extended wear.

Deciding specification

The three-button remote and microphone are designed for Apple iPhone 4 and iPhone 5 compatibility, so buyers needing inline control for other smartphones or devices without that specific pinout should look elsewhere.

Highlights

  • In-ear canal design blocks outside noise with isolating sleeves
  • 6 mm driver delivers 20 Hz–21 kHz frequency response
  • 16 ohm impedance and 96 dB sensitivity suit portable devices
  • Silver-plated 3.5 mm connector resists corrosion for reliable contact
  • TPE-coated flat cable stays tangle-free across 3.77 ft length

Specifications

BrandJAYS
Seriesa-JAYS Four
ModelT00082
TypeIn-Ear
ColorWhite
Driver Unit8.6mm
Frequency Response20Hz-21KHz
Input Impedance16 ohms
Sensitivity96dB S.P.L. at 1KHz
ConnectorSilver-Plated 3.5mm
Ear CouplingCanal
Cord Length3.77 feet
Weight0.49 oz.
FeaturesIsolation: JAYS Sound Isolating Sleeves
TPE coated flat tangle free cable
Shipping weight0.36 kg
Package size152 × 102 × 51 mm

Questions about this item

Does the 16-ohm impedance and 96dB sensitivity cause noticeable heat or battery drain during all-day listening?

At 16 ohms and 96dB sensitivity the earphones draw very little current, so they run cool and have no measurable impact on a phone battery even after hours of use.

What device must I already own to use the silver-plated 3.5mm connector and three-button remote?

You need a source with a standard 3.5mm headphone jack; the inline remote is designed for Apple iPhone 4 or iPhone 5, so full call and volume control works on those models.

Will the 8.6mm drivers and 20Hz-21KHz range sound balanced when plugged into an older portable player with a 3.5mm jack?

Yes, the 16-ohm load is easy for vintage players to drive, and the wide frequency response delivers full bass and treble through the silver-plated 3.5mm plug.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.