We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A rectangular xenon projector lamp module with silver metal housing and exposed arc tube, 294 mm long, 27 mm diameter, new condition

Jaspertronics

Jaspertronics Galaxy 4K-32 HFR-LAMP 2000W 3200 Hour Xenon L Series Projector Lamp

SKU CH-P2VZ-VSB06

2000W Xenon L Series short-arc lamp rated for 3200 hours with 123 mm LCL and 4.5 mm cold arc gap for Barco digital cinema projectors

  • TypeProject Lamp
  • Weight6.0000
  • 2000W Xenon arc lamp powers compatible Barco digital cinema projectors
  • 3200-hour rated life reduces replacement frequency in high-use environments
  • 123 mm light center length and 4.5 mm cold arc gap maintain optical alignment
  • 294 mm length with M12×1.75 pin fits specified Barco lamp houses
  • New Jaspertronics module matches Ushio DXL-20BAF/L specifications for Galaxy 4K-32 HFR

Jaspertronics Galaxy 4K-32 HFR-LAMP 2000W Xenon Lamp

This 2000W Xenon L Series lamp is built for Barco digital cinema projectors including the Galaxy 4K-32 HFR. It supplies the correct electrical load and optical geometry required by professional cinema installations. The lamp is rated for 3200 warranty hours of operation. It is not suited for buyers who need a lower-wattage or longer-life alternative.

2000W 25V 80A Electrical Load and Thermal Profile

The lamp draws 2000W at 25V and 80A with an operating range of 14002000W for stable performance. A 4.5 mm cold arc gap and 123 mm light center length help maintain consistent focus and alignment during use. Proper ventilation in the lamp house manages the heat produced by this high-power short-arc source. No figures for acoustic noise or standby draw are provided.

Mechanical Fitment for Barco Projector Lamp Houses

Physical dimensions include 294 mm lamp length, 27 mm lamp diameter, 55 mm bulb diameter, and 132 mm cable length. Electrical connections use an M12×1.75 pin diameter with 14 mm pin length. The lamp fits the listed Barco models including Prometheus II, DP series, and Galaxy 4K series. It will not work in projectors that require a different base, voltage, or arc geometry.

Highlights

  • 2000W Xenon arc lamp powers compatible Barco digital cinema projectors
  • 3200-hour rated life reduces replacement frequency in high-use environments
  • 123 mm light center length and 4.5 mm cold arc gap maintain optical alignment
  • 294 mm length with M12×1.75 pin fits specified Barco lamp houses
  • New Jaspertronics module matches Ushio DXL-20BAF/L specifications for Galaxy 4K-32 HFR

Specifications

BrandJaspertronics
ModelGalaxy 4K-32 HFR-LAMP
Part NumberGalaxy 4K-32 HFR-LAMP
TypeProject Lamp
Weight6.0000

Questions about this item

How do I install the Galaxy 4K-32 HFR-LAMP and which step is often done incorrectly?

Align the lamp so the 123 mm light centre length and 4.5 mm cold arc gap match the projector’s optical axis, then secure the M12×1.75 pins with exactly 14 mm pin length; the step most often missed is verifying the 132 mm cable routes without strain before tightening.

What maintenance or replacement will this 2000W xenon lamp need later?

Replace the lamp after 3200 warranty hours or when brightness drops below specification; no other user-serviceable parts exist inside the sealed arc tube.

What limit appears first during sustained operation of this lamp?

The 3200-hour rated life is the first hard limit; continuous operation at 2000W, 25V and 80A within the 14002000W range will reach that limit before thermal or electrical margins are exceeded.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.