Jansicotek
Jansicotek OZK1-New 8K@30Hz 2-Port HDMI USB KVM Switch
Lets you control two computers with one monitor, keyboard, mouse, three USB 3.0 peripherals and a network cable, switching by button or remote at up to 8K 30 Hz
- TypeHDMI, USB
- PC ConnectorsHDMI and USB
- Computer Connections2 Ports
- Monitor Connections1 Ports
- Video Resolution7680 x 4320
- PC SelectionManual Switch and Remote Control
- Control two computers with one monitor, keyboard and mouse
- 8K at 30 Hz resolution for ultra-sharp visuals
- Three USB 3.0 ports share peripherals at up to 5 Gbps
- RJ45 network port lets both PCs share one wired connection
- Switch instantly via front button or wireless remote
Two-computer HDMI KVM switch
The Jansicotek OZK1-New lets you operate two computers from a single monitor, keyboard and mouse. It provides two HDMI inputs and one HDMI output alongside three USB 3.0 ports and an RJ45 network port for shared peripherals. Maximum supported video resolution is 7680 x 4320 at 30 Hz. The unit is intended for desk setups that need to toggle between two PCs without unplugging cables.
Front-button and remote switching
Switching between the two connected computers is done with a push button on the device or the supplied wireless remote. LED indicators show which port is active. The automatic scan interval is fixed at 3 seconds if that mode is used. Cables route to the rear of the unit so the front stays clear for flash drives or other temporary devices. No software installation is required for basic operation.
Check graphics and monitor capabilities
The 7680 x 4320 at 30 Hz output only works when both the computer graphics card and the monitor support that resolution over HDMI 2.0b. If either end does not, the switch will fall back to a lower mode such as 4K at 120 Hz. Verify that each PC can drive the desired resolution before ordering. The package includes two USB data cables, a remote controller and a printed manual.
Highlights
- Control two computers with one monitor, keyboard and mouse
- 8K at 30 Hz resolution for ultra-sharp visuals
- Three USB 3.0 ports share peripherals at up to 5 Gbps
- RJ45 network port lets both PCs share one wired connection
- Switch instantly via front button or wireless remote
Specifications
| Brand | Jansicotek |
|---|---|
| Series | OZK1-New |
| Model | OZK1-New |
| Type | HDMI, USB |
| PC Connectors | HDMI and USB |
| Computer Connections | 2 Ports |
| Monitor Connections | 1 Ports |
| Video Resolution | 7680 x 4320 |
| PC Selection | Manual Switch and Remote Control |
| AutoScan Interval | 3 seconds |
| LED Indicators | Yes |
| USB Features | with USB support |
| Application | 4K 120Hz 2 Ports USB KVM HDMI Switch Box: 8K HDMI KVM Switcher Box allows you to control 2 computer with only one set of controls and display screen (mouse and keyboard) and one RJ45 port. Built-in high-performance chips, using high technology to decode, plug and play, no need to drive. This will be a good choice for Enterprise, Office, Multimedia Teaching, Meeting Room, Gaming Room, Home Theater, Research Test, etc. ? |
| Features | 2 PCs Share Multiple Devices:2 in 5 out USB 3.0 HDMI RI45 kvm switch, supports 2 computers sharing 3 USB devices, 1 RJ45 device and 1HDMI device like keyboards, mouses, U disk, printers, scanners, USB cameras, etc. 4K@120Hz HD display:This usb 3.0 kvm switch 2 port supports resolution up to 4K@120Hz and backward compatible. Kvm switch also support HDMI 2.0 and RJ45 Internet connection.Make your image display more delicate and lifelike, and your experience richer and more convenient. RJ45 Network Switch: The KVM switch is outfitted with 1 RJ45 port, offering a network for one of your |
| Dimensions | 5.43 x 5.35 x 1.46 inches |
| Weight | 9.52 Ounces |
| Package Contents | KVM switch body*1pc, USB data Cable*2PCS, USB Manual* 1PC, Remote Controller *1PC |
Questions about this item
How can I confirm the KVM switch is passing an 8K@30Hz signal after connecting both PCs and the monitor?
Check the front-panel LED indicators — they show which PC port is active. Use the button or the included remote to switch; the active port LED lights up. If your graphics card and monitor both support 7680×4320 at 30 Hz over HDMI 2.0b, the display will show that resolution without flicker.
Which cables and accessories ship in the box, and what must I provide myself?
The package includes the KVM switch, two USB data cables, a printed manual, and a wireless remote controller. You must supply two HDMI cables (one per computer to the switch inputs) and one HDMI cable from the switch output to your monitor.
Should I choose the 8K@30Hz mode or the 4K@120Hz mode for my setup?
Select 7680×4320 at 30 Hz only if both your computer’s GPU and your monitor explicitly support that resolution over HDMI 2.0b. Otherwise run at 4K@120Hz, which is also supported and backward-compatible with lower refresh rates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



