Jancy Slugger
Jancy Slugger Annular Cutter with Pilot 63134127041
M2 HSS annular cutter with pilot for metal drilling, first listed January 16, 2020
- TypeDrill Bits
- MaterialM2 HSS
- M2 HSS material provides durable cutting performance
- Annular cutter design removes a core for efficient drilling
- Pilot included ensures accurate hole alignment
- 1/2 inch diameter suits precise metalworking tasks
- 1 inch cutting depth handles standard material thickness
Annular Cutter with Pilot
The Jancy Slugger annular cutter is a metalworking drill bit designed for producing clean, accurate holes in structural steel and plate. It suits fabricators, maintenance crews and machine shops that need a dedicated cutting tool for magnetic drills or press setups. The integrated pilot pin aligns the cut and ejects the slug automatically during operation.
1/2 Inch Diameter and 1 Inch Cutting Depth
This cutter creates a precise 1/2 inch diameter hole with a maximum cutting depth of 1 inch. The diameter and depth combination is the single specification that determines whether the tool matches the hole size and material thickness required for the job. Verify both figures against the workpiece before selecting this cutter.
M2 HSS Construction for Magnetic Drills
The cutter body is made from M2 high-speed steel, offering heat resistance and edge retention when cutting mild and structural steel. It fits standard 3/4 inch Weldon shank arbors used on most magnetic base drills and drill presses. The pilot pin centers the cutter in a pre-drilled starter hole, allowing the annular geometry to remove only the hole perimeter and free the solid slug.
Highlights
- M2 HSS material provides durable cutting performance
- Annular cutter design removes a core for efficient drilling
- Pilot included ensures accurate hole alignment
- 1/2 inch diameter suits precise metalworking tasks
- 1 inch cutting depth handles standard material thickness
Specifications
| Brand | Jancy Slugger |
|---|---|
| Type | Drill Bits |
| Material | M2 HSS |
Questions about this item
What does the 1/2 inch diameter mean for the hole I will drill?
The cutter produces a precise 1/2 inch diameter hole in metal when used with a magnetic drill press.
What shank interface does this annular cutter use and what does it limit?
It uses a standard Weldon shank that fits most magnetic drill presses and limits use to machines accepting that shank.
What physical space and pilot does this cutter need to fit and start the cut?
The 1 inch cutting depth requires clearance for that length and the included pilot centres the cutter before cutting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
