We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat multicolour wire on a reel, 8 m length

JacobsParts Inc.

JacobsParts Inc. RGB Extension Cable 8 m 3528 5050 20 AWG

SKU CH-1HYC-7DEG9

Eight-metre, 20 AWG multi-strand cable extends 3528 and 5050 RGB LED strips indoors or outdoors

  • style?Modern
  • material?Metal, Aluminum
  • colorRGB
  • length8 m
  • Flexible installation with 8 m of multi-strand cable
  • Reliable joints via 4-color solder-ready conductors
  • Suits 3528 and 5050 RGB LED strips
  • Safe low-voltage operation indoors or outdoors
  • Durable 20 AWG aluminium construction handles bends

8 m RGB Extension Cable for 3528 and 5050 Strips

This 8 m cable extends power and data connections for 3528 and 5050 RGB LED strips. It suits installers who need to bridge gaps around corners, under cabinets or along outdoor paths. The four colour-coded conductors match standard RGB strip pinouts for straightforward soldering.

Low-Voltage Only with 20 AWG Multi-Strand Wire

The cable is rated for low-voltage use only and uses 20 AWG multi-strand aluminium conductors. Voltage drop increases with run length, so very long extensions may dim the far end of a strip. Outdoor runs must be protected from physical damage and water ingress at every solder joint.

Solder-Only Connections Require Basic Skill

Each joint must be soldered; no plug-in connectors are supplied. Clean insulation stripping and heat-shrink coverage are essential to prevent shorts. Cold solder joints or reversed polarity are the most common faults and will cause flickering or dead sections.

Highlights

  • Flexible installation with 8 m of multi-strand cable
  • Reliable joints via 4-color solder-ready conductors
  • Suits 3528 and 5050 RGB LED strips
  • Safe low-voltage operation indoors or outdoors
  • Durable 20 AWG aluminium construction handles bends

Specifications

BrandJacobsParts
style?Modern
material?Metal, Aluminum
colorRGB
length8 m

Questions about this item

Which length should I pick for my RGB LED strip project?

The cable is supplied as an 8 m reel of 20 AWG four-core wire that you cut to the exact lengths needed for 3528 or 5050 strips.

What does the 20 AWG rating mean when I solder it to my strips?

20 AWG multi-strand aluminium conductors carry the low-voltage current for RGB LED strips with minimal voltage drop over typical run lengths.

How does the solder-only connection affect installation?

Each joint is made by soldering the four insulated cores directly to the strip pads or controller terminals, giving a permanent low-resistance link.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.