JacobsParts Inc.
JacobsParts Inc. LTCH-S3-BLU 12V 16mm IP67 Momentary Blue LED Disconnect
12V momentary push button with blue LED ring, IP67 waterproof, 16mm cut-out, includes wire harness and O-ring
- TypeMomentary
- Amps3 Amps
- Voltage12 Volts
- StyleFlush
- MaterialMetal,Rubber
- IP RatingIP67
- IP67 rating withstands heavy rain and splashes
- 12 V blue LED offers continuous or momentary illumination
- Momentary action powers on only while pressed
- Wire harness and O-ring enable solder-free, sealed install
- 250 V 3 A rating suits automotive, marine and desktop use
16mm IP67 Momentary Switch
The JacobsParts LTCH-S3-BLU is a 16mm metal push button rated for 12V DC operation with a blue LED indicator. It suits automotive, marine and desktop projects that need a momentary contact switch with an IP67 waterproof seal.
Metal Build With Wire Harness
A metal body and rubber O-ring provide the IP67 rating against heavy rain and splashes. The included wire harness removes the need for soldering, and the flush mounting style fits a 5/8 inch panel cutout with the supplied metal nut.
3 Amp Momentary Limit
The switch carries a maximum rating of 250V AC/DC at 3A while the LED draws 15mA at 12V. Momentary action means the circuit closes only while the button is held, so it cannot serve as a latching power toggle for devices that need a maintained on state.
Highlights
- IP67 rating withstands heavy rain and splashes
- 12 V blue LED offers continuous or momentary illumination
- Momentary action powers on only while pressed
- Wire harness and O-ring enable solder-free, sealed install
- 250 V 3 A rating suits automotive, marine and desktop use
Specifications
| Type | Momentary |
|---|---|
| Amps | 3 Amps |
| Voltage | 12 Volts |
| Style | Flush |
| Material | Metal,Rubber |
| IP Rating | IP67 |
| Brand | JacobsParts |
| Model | LTCH-S3-BLU |
| Features | LTCH-S3-BLU |
Questions about this item
What does the IP67 rating mean for this 16mm switch?
IP67 means the switch is dust-tight and can survive temporary immersion in water, so heavy rain or splashes will not damage the sealed contacts.
What panel cut-out diameter does the 16mm flush body need?
Drill a 16 mm (5/8 inch) hole; the threaded barrel fits through and is secured from behind with the supplied metal nut and optional rubber O-ring.
How do I wire the included harness without soldering?
The harness uses crimp connectors that slide onto the switch terminals — match the LED wires to 12 V DC for blue illumination and the switch leads to your load circuit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
