JacobsParts Inc.
JacobsParts Inc. 60JY-2-1206 60W Soldering Iron 0.6mm 63/37 12.5g x2
A 60 W pencil-tip soldering iron with 58-inch cord, indicator light and replaceable tip, plus two 12.5 g tubes of 0.6 mm 63/37 rosin-core solder melting at 183°C
- TypeSoldering iron kit
- Size/Dimensions0.6mm
- 60 W output heats quickly for efficient joints
- 6 mm precision tip suits fine electronics work
- 58 inch cord gives flexible bench reach
- 63/37 rosin-core solder melts at 183 °C for reliable flow
- Two 12.5 g solder tubes included so you can start immediately
Precision electronics kit
The Delcast 60JY-2-1206 kit pairs a 60 W pencil-tip soldering iron with two 12.5 g tubes of 0.6 mm rosin-core 63/37 tin-lead solder. It targets hobbyists, repair technicians and DIY homeowners who need a ready-to-use solution for through-hole boards, wire splices and small-component rework. The 110 V supply and 58 inch cord suit North American bench outlets.
Capacity and thermal limits
The iron reaches a working temperature around the solder’s 183 °C melting point quickly, giving enough headroom for standard copper traces, connector pins and light gauge wire. Continuous heavy joints such as large ground planes or thick battery cables will draw heat faster than the 60 W element can replace it, so the tip temperature drops and dwell time increases. The 0.6 mm solder diameter feeds cleanly on fine-pitch pads but becomes tedious on joints requiring high volume fill.
Build cues and daily use
A power indicator light confirms the heater is live, while the insulated handle stays cool during extended sessions and the moulded strain relief protects the cord at the handle entry. The tip is replaceable, extending the tool’s service life when the plating wears. Two pre-measured solder tubes keep flux fresh and avoid the waste of a large spool for occasional users. The kit contains no stand or cleaning sponge, so a separate heat-resistant rest is required for safe bench placement.
Highlights
- 60 W output heats quickly for efficient joints
- 6 mm precision tip suits fine electronics work
- 58 inch cord gives flexible bench reach
- 63/37 rosin-core solder melts at 183 °C for reliable flow
- Two 12.5 g solder tubes included so you can start immediately
Specifications
| Brand | Delcast |
|---|---|
| Model | 60JY-2-1206 |
| Type | Soldering iron kit |
| Size/Dimensions | 0.6mm |
Questions about this item
Will the 60 W iron run on my existing 110 V bench supply?
Yes, the iron is rated for 110 V input and draws 60 W, so it works with standard North American bench power.
How can I confirm the iron is heating correctly after I plug it in?
The built-in power indicator light illuminates when the unit is energised and the tip reaches the 183 °C / 361.4 °F melting point of the included 63/37 solder.
Does the kit include the 0.6 mm 63/37 solder wire or must I buy it separately?
Two 12.5 g tubes of 0.6 mm rosin-core 63/37 solder are supplied in the box, so no separate purchase is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
