JacobsParts Inc.
JacobsParts Inc. 30JY-2-1206 30W Soldering Iron Kit with 2x 12.5g 63/37 Solder .6mm
30 W soldering iron kit with two 12.5 g tubes of .6 mm 63/37 solder for low-temperature electronics work
- TypeElectric Soldering Iron Kit
- Volts110 V
- Color/FinishBlue
- Item Count1
- FeaturesHigh quality ceramic heater
- Watts30 Watts
- 30 W ceramic heater warms quickly for electronics work
- Stainless steel tip resists corrosion and transfers heat efficiently
- 63/37 eutectic solder melts at a single 183 °C point
- 6 mm diameter solder wire suits fine-pitch components
- 5 m cord provides reach without an extension lead
30 W soldering iron kit for electronics
This 30 W pencil-tip soldering iron runs on 110 V AC power and uses a ceramic heater to reach working temperature quickly. The 58-inch cord gives room to manoeuvre at a bench, and the blue handle stays comfortable during extended sessions. Two tubes of 0.6 mm diameter 63/37 tin-lead solder are included, each weighing 12.5 g.
Suited to hobbyists repairing circuit boards
The low wattage protects heat-sensitive components that a higher-power iron could damage, and the eutectic 63/37 solder melts cleanly at 183 °C without a pasty range. Users who need to solder heavy connectors, thick wire or large ground planes will find the thermal reserve insufficient and should choose a more powerful station.
30 W ceramic heater on 110 V mains
The iron draws 30 watts from a standard 110 V outlet through a 1.5 metre cord, so no transformer or temperature controller is built in. If your mains voltage differs or you require adjustable temperature for lead-free alloys, this kit will not meet the requirement.
Highlights
- 30 W ceramic heater warms quickly for electronics work
- Stainless steel tip resists corrosion and transfers heat efficiently
- 63/37 eutectic solder melts at a single 183 °C point
- 6 mm diameter solder wire suits fine-pitch components
- 5 m cord provides reach without an extension lead
Specifications
| Brand | Delcast |
|---|---|
| Model | 30JY-2-1206 |
| Type | Electric Soldering Iron Kit |
| Volts | 110 V |
| Color/Finish | Blue |
| Item Count | 1 |
| Features | High quality ceramic heater |
| Watts | 30 Watts |
Questions about this item
What mains voltage does the 30W soldering iron require?
It runs on 110 V AC mains power supplied through the 58-inch cord.
How do I mount the stainless steel tip onto the ceramic heater?
Screw the tip into the threaded heater barrel until it seats firmly; do not overtighten or the ceramic may crack.
When should I replace the 0.6 mm 63/37 solder wire?
Replace a tube when the wire runs out; each tube holds 12.5 g of eutectic solder that melts at 183 °C.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
