JacobsParts Inc.
JacobsParts Inc. 30JY-1-1208 30W soldering iron 0.6mm 63/37 solder 12.5g
A 30-watt soldering iron with a 58-inch cord, ceramic heater and stainless-steel tip, plus 12.5 grams of 0.6-millimetre 63/37 rosin-core solder that melts at 183°C
- Selling UnitSet
- TypeSoldering Kits
- Volts120
- Color/FinishBlue
- Item Count1
- Watts30
- 30 W ceramic heater reaches temperature fast for efficient joints
- 58-inch cord gives flexible reach around the workbench
- 63/37 eutectic alloy melts at 183 °C for clean, low-heat connections
- 6 mm rosin-core wire feeds smoothly from the 12.5 g dispenser tube
- Insulated handle stays comfortable during extended electronics or craft sessions
30W soldering iron kit
The Delcast 30JY-1-1208 is a 30W soldering iron supplied with a 12.5g tube of 0.6mm 63/37 rosin core solder. It runs on 110-120V mains power and is intended for electronics, computer equipment and craft projects. The low wattage suits sensitive components that could be damaged by higher heat.
Easy plug-in use with eutectic solder
The iron has a 58" cord, ceramic heater and stainless steel tip with an insulated handle. It heats to working temperature quickly. The included solder is eutectic 63/37 tin-lead alloy that melts at 183? / 361.4? without a plastic range, and the rosin flux core cleans copper tracks and component leads as you work.
Small jobs only — not for heavy joints
The 30W output and 0.6mm solder diameter comfortably handle fine-pitch electronics, connectors and thin wires. Larger terminals, thick cables or heat-sinking ground planes will draw heat away faster than the iron can replace it, so those joints will not wet properly.
Highlights
- 30 W ceramic heater reaches temperature fast for efficient joints
- 58-inch cord gives flexible reach around the workbench
- 63/37 eutectic alloy melts at 183 °C for clean, low-heat connections
- 6 mm rosin-core wire feeds smoothly from the 12.5 g dispenser tube
- Insulated handle stays comfortable during extended electronics or craft sessions
Specifications
| Brand | Delcast |
|---|---|
| Model | 30JY-1-1208 |
| Selling Unit | Set |
| Type | Soldering Kits |
| Volts | 120 |
| Color/Finish | Blue |
| Item Count | 1 |
| Watts | 30 |
Questions about this item
How can I verify the 30W iron is heating correctly after plugging it into 120V?
The ceramic heater reaches working temperature quickly; a properly heated tip will melt the 63/37 solder at its 183 °C melting point within seconds of contact.
What comes in the set and is anything else required to start soldering?
The package includes one 30W soldering iron with a 58-inch cord and stainless steel tip plus one 12.5 g tube of 0.6 mm rosin-core 63/37 solder; no extra items are needed for basic electronic work.
Which solder specification should I choose for general electronics repairs?
The supplied 0.6 mm diameter 63/37 tin-lead rosin-core solder with a 183 °C melting point is the standard choice for through-hole and fine-pitch PCB work.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
