We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Warm white LED strip on reel with power supply, adhesive backing, 10 metres, 600 LEDs

JacobsParts Inc.

JacobsParts Inc. 10m 600 LED Strip Light Kit 24V 34W Warm White 3000K SMD2835

SKU CH-JWD7-X7TXF

A 10 m warm-white LED strip with 600 SMD2835 chips, adhesive backing, cut points every six LEDs and an included 24 V power supply for indoor accent lighting

  • style?Custom
  • materialVinyl, metal, Copper
  • featuresWith Power Supply
  • lightcolorWarm White
  • typeTape
  • sizedimensions10m
  • Warm 3000 K glow creates cosy ambience
  • 600 SMD2835 LEDs deliver 2200 lm total output
  • Cuttable every 6 LEDs for custom lengths
  • Adhesive backing and barrel jack enable tool-free setup
  • Double-layer PCB with extra copper runs cooler and lasts longer

10 m 600 LED Warm White Strip Kit

This 10 metre reel delivers 600 SMD2835 LEDs at 3000 K warm white for indoor accent lighting. The kit includes a 24 V 3 A power supply with a 5.5 × 2.1 mm barrel plug. Total power draw is 34 W producing 2200 lumens. It suits DIY enthusiasts and lighting professionals seeking simple under-cabinet, sign or architectural illumination.

Adhesive Backing And Cut Points

Installation uses the pre-applied adhesive backing and female barrel jack on the strip. The double-layer PCB allows cutting every 6 LEDs for custom lengths. Common issues include insufficient surface cleaning before sticking and exceeding the adapter’s 72 W maximum when chaining multiple reels. The IP20 rating means the strip must stay dry and free from condensation.

Indoor 24 V Power Requirements

Verify the installation area is indoor only because the strip carries an IP20 rating. Ensure a 24 V DC supply rated at least 1.4 A is available; the included adapter provides 3 A. Confirm the mounting surface is clean, flat and non-porous for reliable adhesion. No controller is included beyond the basic button unit, so dimming or colour change is not possible.

Highlights

  • Warm 3000 K glow creates cosy ambience
  • 600 SMD2835 LEDs deliver 2200 lm total output
  • Cuttable every 6 LEDs for custom lengths
  • Adhesive backing and barrel jack enable tool-free setup
  • Double-layer PCB with extra copper runs cooler and lasts longer

Specifications

BrandJacobsParts
style?Custom
materialVinyl, metal, Copper
featuresWith Power Supply
lightcolorWarm White
typeTape
sizedimensions10m
voltage24V

Questions about this item

How can I confirm the strip is delivering the rated 34 W after installation?

Measure the DC current at the 5.5 × 2.1 mm barrel plug; a reading near 1.4 A at 24 V indicates the kit is drawing the specified 34 W.

Which components are included and what must I source separately?

The box contains a 10 m reel with 600 SMD2835 LEDs, adhesive backing, female barrel jack and a 24 V 3 A (72 W max) AC adapter; no extra parts are required for basic operation.

Should I choose the 3000 K or 2800 K version for warm white?

The manufactured product is 3000 K; the 2800 K figure appears only in the supplier title and does not represent a separate selectable version.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.