We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Jabra QD to 3.5 mm adapter cord with answer/end button

Jabra Enterprise Products

Jabra Enterprise Products 8800-00-103 Link Mobile QD to 3.5 mm Speaker

SKU CH-GBA8-CWT50 MPN 8800-00-103

Connects Jabra Quick Disconnect headsets to 3.5 mm phone jacks with an inline answer/end button

  • ColorBlack
  • FeaturesJabra Quick Disconnect (QD) to 3.5 mm jack cord, with answer
  • Connect Jabra QD headsets to 3.5 mm phones using this adapter cord
  • Answer and end calls directly via the integrated push button on the cable
  • Extend the life of existing QD headsets by pairing them with OMTP standard mobile devices
  • Simple plug-and-play connection between Quick Disconnect and mini-phone interfaces
  • Designed for Nokia N95 and other OMTP standard handsets with 3.5 mm jacks

Jabra Link Mobile QD Adapter

This cord connects Jabra Quick Disconnect headsets to mobile phones using a 3.5 mm plug. It is built for professionals who already own a Jabra QD headset and want to take calls on a handset without buying a new headset. The integrated answer/end button gives direct call control from the cable. It suits office workers and mobile users who need a simple wired link.

OMTP 3.5 mm Wiring Standard

The connector follows the OMTP pin-out used by the Nokia N95 and other handsets of that era. If your phone uses the newer CTIA standard the microphone and ground contacts will be swapped and the headset will not work correctly. Check the phone specification before purchase because the adapter cannot be re-wired.

Passive Cable Thermals

The adapter draws no power and contains no active electronics beyond the mechanical switch. It adds no audible noise and generates no measurable heat during calls. The only power draw comes from the phone microphone bias through the headset itself.

Highlights

  • Connect Jabra QD headsets to 3.5 mm phones using this adapter cord
  • Answer and end calls directly via the integrated push button on the cable
  • Extend the life of existing QD headsets by pairing them with OMTP standard mobile devices
  • Simple plug-and-play connection between Quick Disconnect and mini-phone interfaces
  • Designed for Nokia N95 and other OMTP standard handsets with 3.5 mm jacks

Specifications

BrandJabra
ColorBlack
Part Number8800-00-103
FeaturesJabra Quick Disconnect (QD) to 3.5 mm jack cord, with answer/end button. For Nokia N95 and other OMTP standard phones.
Shipping weight0.05 kg
Package size203 × 152 × 5 mm

Questions about this item

What does the 3.5 mm connection on this Jabra 8800-00-103 cable actually do when plugged into a phone?

The 3.5 mm plug connects a Jabra Quick Disconnect headset to phones using the OMTP standard such as the Nokia N95, routing both audio and microphone signals through a single four-pole jack.

How does the OMTP wiring on the 3.5 mm end affect which phones work with the 8800-00-103?

The cable follows the OMTP pinout used by the Nokia N95 and similar handsets, so the microphone and ground contacts match those devices; phones with the later CTIA layout will not work correctly.

What physical connectors must match on the headset and the cable for the 8800-00-103 to fit?

The headset side needs a Jabra Quick Disconnect socket, while the phone side requires a 3.5 mm four-pole mini-phone jack wired to the OMTP standard.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.