We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear double-sided tape roll on white core, 2 in x 60 yds

J.V. Converting Company, Inc.

J.V. Converting Company, Inc. DC-4109RS Double-Sided Film Tape 2 in x 60 yds Clear

SKU CH-H30B-GCWN9

Double-sided polyester film tape splices papers, plastics, films and foils with 29 oz/in adhesion

  • TypeDouble Sided Tape
  • ColorClear
  • Double-sided design bonds papers, plastics, films and foils securely
  • Polyester film backing resists tearing during splicing and mounting tasks
  • Water-based acrylic adhesive offers one-hour repositioning window before full cure
  • 29 ounces per inch adhesion matches general-purpose masking tape strength
  • 48 mm by 55 m roll fits standard 3-inch core dispensers

Double-Sided Film Tape for Splicing

J.V. Converting Company DC-4109RS is a clear polyester film tape coated on both sides with a modified solvent-free water-based acrylic adhesive. It is designed for splicing papers, plastics, films and foils. The tape also suits mounting nameplates, keyboard assembly and laminating dissimilar metals. A one-hour dwell time allows repositioning before the bond sets fully.

Adhesion Strength and Application Notes

The adhesive delivers 29 ounces per inch of adhesion, comparable to a general-purpose masking tape. Rolls are supplied on a 3-inch neutral core and are typically cut from log rolls onto plain white cores. The actual metric dimensions are 48mm by 55m, approximately 5% narrower than the nominal 2-inch by 60-yard size. Users should test on an inconspicuous area to confirm clean removal from specific substrates.

Build Integration and Usage Constraints

The tape requires clean, dry surfaces for reliable bonding across dissimilar materials such as metal and plastic. It frees designers from mechanical fasteners in tight assemblies where drilling or riveting is impractical. The product is not suited for applications demanding high-temperature resistance, structural load-bearing or outdoor weather exposure without further validation. Buyers needing conductive properties or specialised certifications should evaluate alternative products.

Highlights

  • Double-sided design bonds papers, plastics, films and foils securely
  • Polyester film backing resists tearing during splicing and mounting tasks
  • Water-based acrylic adhesive offers one-hour repositioning window before full cure
  • 29 ounces per inch adhesion matches general-purpose masking tape strength
  • 48 mm by 55 m roll fits standard 3-inch core dispensers

Specifications

TypeDouble Sided Tape
ColorClear

Questions about this item

How do I apply the 2 in wide DC-4109RS tape to get a reliable splice?

Clean both surfaces, press the tape firmly onto the first substrate, wait one hour for the acrylic adhesive to reach full dwell, then bond the second material with even pressure across the 48 mm width.

Will the PET carrier or adhesive need replacement during long-term indoor mounting?

The polyester film carrier and water-based acrylic adhesive are designed for permanent bonding; no scheduled replacement is required unless the splice is mechanically damaged or the substrate fails.

At what load does the 29 oz per inch adhesion typically release under constant tension?

Sustained loads approaching 29 ounces per inch will overcome the bond first, so design safety factors below that value for continuous-duty applications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.