IVY Classic Industries, Inc.
IVY Classic Industries, Inc. 42000 Sanding Sponge 46/80 Grit
A flexible sanding sponge coated on four sides with 46/80 grit aluminum oxide for wood, metal, paint, plastic, fiberglass, plaster, drywall and autobody work, usable wet or dry and rinseable for reuse
- Medium/coarse 46/80 grit tackles rough shaping and fine smoothing
- Aluminium oxide coating cuts wood, metal, paint, plastic and fibreglass
- Flexible foam block wraps curves and reaches tight corners
- Coated on four sides so you flip instead of replacing
- Rinse clean and reuse wet or dry for longer life
What this sanding sponge does
The IVY Classic 42000 sanding sponge is a flexible abrasive block coated on four sides with aluminum oxide grit rated 46/80 medium coarse. It is designed for hand sanding on wood, metal, painted surfaces, plastic, fiberglass, plaster, drywall and autobody finishes. The foam backing conforms to curved and flat areas alike, giving a secure grip during extended use.
Limits of the coated-abrasive format
As a hand-held sponge, material removal rate depends entirely on user pressure and stroke speed, so aggressive stock removal on hard metals will be slow compared with power tools. The abrasive surface loads with dust during dry use, reducing cut until rinsed, and the foam core can tear if forced into sharp inside corners or against protruding fasteners. Wet sanding reduces loading but adds cleanup time.
Capacity and where it runs out
The 46/80 grit combination handles initial shaping, paint stripping and blend sanding on moderate surface areas such as a door panel or a furniture side before the coating wears smooth. It comfortably covers contoured trim, rounded edges and broad flats without changing tools, but large floor or deck projects will consume multiple sponges. Rinse and reuse extends life, yet the abrasive eventually dulls past effective cutting.
Highlights
- Medium/coarse 46/80 grit tackles rough shaping and fine smoothing
- Aluminium oxide coating cuts wood, metal, paint, plastic and fibreglass
- Flexible foam block wraps curves and reaches tight corners
- Coated on four sides so you flip instead of replacing
- Rinse clean and reuse wet or dry for longer life
Specifications
No published specifications for this item yet.
Questions about this item
Should I choose the 46 grit or the 80 grit side for my job?
Use the 46 grit side for faster material removal on wood, metal or body filler. Switch to the 80 grit side for finer smoothing before paint or finish.
How does the 46/80 grit rating translate to actual sanding performance?
The coarse 46 grit cuts aggressively to level surfaces or strip coatings, while the medium 80 grit refines scratches and prepares surfaces for primer or topcoat.
Can this sponge be used with water or solvents without falling apart?
Yes, the aluminium oxide abrasive is bonded for wet or dry use. Rinse the sponge after use to clear dust and extend its life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
