iTekiro
iTekiro 200W AC Adapter for MSI Sword 16 HX B13VFKG B13VGKG B14VGKG
A 200W AC adapter with a 4.5 mm centre-pin tip and extra-long cords replaces 150W, 180W and 200W chargers for compatible MSI Sword 16 models
- TypeAC Adapter
- Battery TypeLithium-Ion
- AC Adapter Voltage20V
- AC Adapter Current10A
- AC Adapter Output Power200W
- 200 W output powers MSI Sword 16 HX laptops
- 5 mm centre-pin plug matches original connector
- Extra-long 6 ft AC and DC cords add reach
- Worldwide 100–240 V input works on any mains
- Replaces 150 W, 180 W and 200 W chargers safely
Compatible MSI Sword 16 HX models
This 200W AC adapter fits MSI Sword 16 HX laptops including the B13VFKG, B13VGKG and B14VGKG series. It matches the original A21-200P2B, A200A022P, ADP-200JB F and 957-15851P-101 part numbers. The 4.5 mm plug tip with a centre pin ensures a secure connection.
Replaces lower-wattage chargers
It replaces the factory 200W, 180W and 150W chargers for these models. The adapter will not substitute a 280W, 300W or 330W unit, so buyers needing higher output should look elsewhere. Output operates at 20V 10A with alternative 19.5V 10.3A and 19V 10.5A profiles.
Worldwide input with extra-long cords
Input accepts AC 100 to 240V at 50 to 60 Hz for global use. A UL-listed 6 ft three-prong AC cord and a 6 ft DC cord give generous reach from wall outlet to laptop. The durable case resists water and humidity while built-in protections guard against overload, short circuit, over-voltage, over-current and over-temperature.
Highlights
- 200 W output powers MSI Sword 16 HX laptops
- 5 mm centre-pin plug matches original connector
- Extra-long 6 ft AC and DC cords add reach
- Worldwide 100–240 V input works on any mains
- Replaces 150 W, 180 W and 200 W chargers safely
Specifications
| Type | AC Adapter |
|---|---|
| Battery Type | Lithium-Ion |
| AC Adapter Voltage | 20V |
| AC Adapter Current | 10A |
| AC Adapter Output Power | 200W |
Questions about this item
What size plug tip does this adapter use?
The adapter has a 4.5 mm diameter plug tip with a centre pin inside.
How do I connect the AC and DC cords during installation?
Plug the 6 ft UL listed 3-prong AC power cord into the adapter brick, then connect the 6 ft DC power cord to the laptop.
When should I replace this 200W adapter?
Replace it if the output voltage drops below 20V 10A, the plug tip wears, or the unit shows physical damage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



