We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ironclad

Ironclad KKC5B-02-S Cut Resistant Gloves Size S Grey/Black 1 Pair

SKU CH-CG4T-VKK6M

Cut-resistant gloves with ANSI A4 palm protection, nitrile coating and EN 388:2016 certification

  • ANSI A4 cut level protects hands from sharp edges
  • ANSI/ISEA Impact Level 1 guards knuckles against bumps
  • Nitrile palm coating gives grip in oily or wet conditions
  • Seamless HPPE knit liner fits snugly without irritation
  • Meets ANSI 105 and EN 388:2016 safety standards

Cut-resistant gloves for precision tasks

These Ironclad gloves deliver ANSI/ISEA Cut Level A4 protection on the palm side with a seamless knit HPPE liner and nitrile coating. The knit cuff and unlined construction keep the fit close for dexterity when handling sharp materials in automotive, assembly or general maintenance work. Grey and black colouring.

Slip on and work immediately

The seamless knit design means no stiff seams to break in; the gloves pull on like a second skin and the nitrile palm coating grips dry or lightly oily parts without silicone residue. Impact protection is rated ANSI/ISEA Level 1, so heavy crushing hazards are not covered, and the lack of insulation makes them unsuitable for cold environments.

Check sizing and hazard requirements before ordering

Confirm the wearer needs a Size S fit, as the knit cuff offers limited adjustment. Verify that ANSI 105 A4 cut resistance and EN 388:2016 ratings satisfy the site safety specification, and note that touchscreen operation is not supported so devices must be used bare-handed or removed.

Highlights

  • ANSI A4 cut level protects hands from sharp edges
  • ANSI/ISEA Impact Level 1 guards knuckles against bumps
  • Nitrile palm coating gives grip in oily or wet conditions
  • Seamless HPPE knit liner fits snugly without irritation
  • Meets ANSI 105 and EN 388:2016 safety standards

Specifications

BrandIRONCLAD PERFORMANCE WEAR

Questions about this item

How can I verify the gloves meet the ANSI 105 and EN 388:2016 standards after putting them on?

Check the labelling on the cuff or packaging for the printed ANSI/ISEA Cut Level A4 and Impact Level 1 markings that confirm compliance with ANSI 105 and EN 388:2016.

What comes in the package and is anything else needed to start using them?

The package contains one pair of seamless knit gloves with nitrile palm coating; no additional items are required for use.

Which cut-resistance level should I choose between the listed ANSI/ISEA Cut Level A4 and Impact Level 1 ratings?

Select these gloves when the task demands ANSI/ISEA Cut Level A4 palm protection together with ANSI/ISEA Impact Level 1 on the back of hand.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.