We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three pairs of black Kevlar mechanics gloves with gauntlet cuffs and silicone-infused palms

Ironclad

Ironclad HW4-03M Heat Resist Gloves Kevlar M 450°F 3 pair

SKU CH-SHM0-K0FTY MPN HW4-03M

Three pairs of Kevlar mechanics gloves rated for 450 °F with A2 cut resistance and silicone-infused palms

  • MaterialKevlar(R)
  • Kevlar construction shields hands up to 450 °F
  • Silicone-infused palm delivers sure grip on hot parts
  • ANSI/ISEA A2 cut rating protects against sharp edges
  • Gauntlet cuff extends coverage past the wrist
  • Three pairs included for crew rotation or spares

Heat-resistant mechanics gloves

These mechanics gloves use Kevlar aramid on the palm, back and liner to resist cuts and heat up to 450 degrees F. A silicone-infused palm adds grip while the gauntlet cuff extends coverage over the wrist. They are sold as a pack of three pairs in medium size. The construction is cut and sewn to meet EN and ANSI/ISEA cut level A2 standards.

Users needing cut level A2 and 450°F protection

Technicians handling hot, sharp parts in automotive or industrial settings will find the aramid construction and gauntlet cuff suitable. Buyers who require touchscreen operation should look elsewhere because these gloves are not compatible. Workers needing insulated liners for cold environments or higher cut ratings than A2 will need different hand protection.

ANSI/ISEA cut level A2 rating

This single rating defines the glove’s tested resistance to cutting forces and determines whether it meets a specific safety requirement. The EN marking confirms additional European conformity. If the job specification calls for a different cut level, these gloves will not satisfy it.

Highlights

  • Kevlar construction shields hands up to 450 °F
  • Silicone-infused palm delivers sure grip on hot parts
  • ANSI/ISEA A2 cut rating protects against sharp edges
  • Gauntlet cuff extends coverage past the wrist
  • Three pairs included for crew rotation or spares

Specifications

BrandIronclad
ModelHW4-03M
MaterialKevlar(R)

Questions about this item

How often will the Kevlar palm material need replacing under heavy use?

The gloves use a cut-and-sewn Kevlar construction rated to ANSI/ISEA Cut Level A2; replace them once the palm material shows wear or the silicone infusion loses grip.

What is the maximum temperature these gloves can withstand before the material degrades?

They are rated for a maximum temperature of 450 Degrees F, which is the limit that appears first during sustained high-heat exposure.

Do the Kevlar gloves become stiff or uncomfortable when worn all day in a hot workshop?

The uninsulated gauntlet design and aramid liner are built for heat resistance up to 450 Degrees F without adding bulk that traps heat.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.