We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular internal USB 2.0 hub with four 9-pin ports and magnetic base

IOGEAR CC-9310002-WW internal 4-port USB 2.0 hub magnetic SATA black

SKU CH-312H-N82KV

An internal hub adding four USB 2.0 ports with magnetic mounting and SATA power, delivering up to 480 Mbps bandwidth

  • ColorBlue
  • Length< 6 ft.
  • Connector Number16
  • Apple CompatibleLightning connector
  • SpecificationsPortable
  • Sports Team1 Piece
  • Add four internal USB 2.0 devices with a single hub
  • Up to 480Mbps bandwidth across four USB 2.0 ports
  • Magnetic base attaches to any steel surface in the case
  • Powered directly from a SATA connector for reliable operation
  • Fits tight Mini-ITX builds with a compact low-profile design

Internal 4-Port USB 2.0 Hub

The IOGEAR CC-9310002-WW adds four internal 9-pin USB 2.0 headers to a desktop system. It is designed for builders who need to connect multiple internal devices such as RGB controllers, AIO coolers, or supplementary power modules. The hub delivers up to 480Mbps bandwidth across all connected ports. Installation uses a magnetic base that attaches to any ferrous surface inside the chassis.

Magnetic mounting replaces screw-in brackets

Traditional internal hubs often require a dedicated bracket or spare drive bay, which can be difficult to fit in compact builds. This unit simply snaps onto a steel panel, freeing up mounting points and cable routing space. The upgrade is worthwhile when the motherboard lacks sufficient 9-pin headers for all planned peripherals. A single SATA power connector supplies the hub and attached devices.

Suits compact or header-limited builds

This hub suits enthusiasts assembling Mini-ITX or small-form-factor systems where internal space is tight and header count is low. It also helps anyone adding several USB-powered accessories without expanding the motherboard. Builders whose boards already provide ample 9-pin headers, or who prefer a permanently screwed-in bracket, should look at other solutions. The magnetic mount requires a steel surface to hold securely.

Highlights

  • Add four internal USB 2.0 devices with a single hub
  • Up to 480Mbps bandwidth across four USB 2.0 ports
  • Magnetic base attaches to any steel surface in the case
  • Powered directly from a SATA connector for reliable operation
  • Fits tight Mini-ITX builds with a compact low-profile design

Specifications

BrandIOGEAR
ModelCC-9310002-WW
ColorBlue
Length< 6 ft.
Connector Number16
Apple CompatibleLightning connector
SpecificationsPortable
Sports Team1 Piece
ConductorCopper Conductor
FeaturesPortable
Disclaimernot_applicable

Questions about this item

Does the hub need a SATA power connector and a 9-pin USB 2.0 header on the motherboard?

Yes, it draws power from a SATA connector and connects to the motherboard through a standard 9-pin USB 2.0 header.

How does the magnetic mounting work and what is the common mistake?

The hub snaps to any steel surface inside the case; the mistake is placing it where the short cables cannot reach the motherboard header and SATA port.

When should the SATA power cable or magnetic base be replaced?

Replace the SATA cable if the connector feels loose or pins are bent, and replace the hub if the magnetic base no longer holds securely to the case.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.