IOGEAR ADpate004r USB C Female to USB A Male Cable 6in 10Gbps 2-Pack
Two short braided cables convert USB-A ports to USB-C at 10 Gbps while delivering up to 60 W of power
- Connector Number16
- Wire Gauge14 AWG
- Specifications6in, ADpate004r, URELEGAN, PC, laptop, USB charger,power ban
- Features6in, PC, laptop, USB charger,power bank, phone, flash drive,
- Reduces port strain with flexible 6-inch braided cable design
- 10Gbps data transfer via USB 3.2 Gen 2 standard
- 60W charging bridge converts legacy USB-A power sources
- 833MB/s tested throughput moves 1GB files in under one second
- Two-pack convenience keeps spare adapters at desk and in bag
Compact USB-C to USB-A Adapter Cable
This two-pack provides a six-inch USB-C female to USB-A male cable built to the USB 3.2 Gen 2 standard for users who need to connect USB-C peripherals to legacy USB-A ports on laptops or desktops. The short, braided design reduces strain on the host port and avoids the clutter of longer cables. It suits anyone linking flash drives, card readers, keyboards, mice, or USB-C headphones to older hardware.
Braided Build With 10 Gbps Data And 60 W Power
Each cable uses 14 AWG wiring and a 16-pin connector layout to deliver up to 10 Gbps transfer rates, with real-world reads and writes reaching 833 MB/s. The same connection supports 60 W and 3 A charging, letting you repurpose USB-A wall chargers, car chargers or power banks for USB-C phones, tablets, earbuds or a MagSafe puck. The flexible braid resists tangling and stays put on a busy desk.
Check Your Host Port And Device Compatibility
Verify that your computer or hub supplies a standard USB-A receptacle and that the USB-C device you plan to attach accepts power and data through a female USB-C socket. The adapter is rated for USB 3.2 Gen 2 speeds, so performance will fall back to USB 2.0 levels if either end only supports the older spec. No driver installation is required for keyboards, mice or storage devices.
Highlights
- Reduces port strain with flexible 6-inch braided cable design
- 10Gbps data transfer via USB 3.2 Gen 2 standard
- 60W charging bridge converts legacy USB-A power sources
- 833MB/s tested throughput moves 1GB files in under one second
- Two-pack convenience keeps spare adapters at desk and in bag
Specifications
| Brand | IOGEAR |
|---|---|
| Model | ADpate004r |
| Connector Number | 16 |
| Wire Gauge | 14 AWG |
| Specifications | 6in, ADpate004r, URELEGAN, PC, laptop, USB charger,power bank, phone, flash drive, card reader, keyboard, mice, hub, Type-C headphone and more |
| Features | 6in, PC, laptop, USB charger,power bank, phone, flash drive, card reader, keyboard, mice, hub, Type-C headphone and more |
Questions about this item
What real-world transfer speed does the USB 3.2 Gen 2 interface reach?
Testing shows read and write speeds up to 833 MB/s, about 40 times faster than USB 2.0, so a 1 GB file moves in under one second with compatible hosts and devices.
What physical space does the 6-inch braided cable need to fit without strain?
The short 6-inch length stays on the desk, avoids blocking adjacent ports, and reduces mechanical stress on the laptop USB-A port compared with rigid adapters or long cables.
How do I connect the cable for 60 W charging without damaging the port?
Plug the USB-A male end into the charger or hub first, then attach the USB-C device to the female end; the 14 AWG conductors handle 3 A safely for phones, tablets, and MagSafe chargers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


