Intermatic
Intermatic R8806R108C Electromechanical Timer specialty garden hand tool
Electromechanical timer with a 24-hour dial, 25 A DPST-NO contacts, and 34 trippers for up to 30 daily on/off cycles
- TypeCar
- MaterialHAWA
- 24-hour scheduling with 12-minute minimum intervals
- 25 A DPST-NO switching at 208–277 V AC
- Steel NEMA 3R enclosure for outdoor durability
- 34 trippers enable up to 30 on/off cycles daily
- Synchronous motor plus manual override for reliable operation
Intermatic R8806R108C 24-Hour Timer
The Intermatic R8806R108C is an electromechanical timer designed for 24-hour scheduling of electrical circuits. It operates on 208 to 277V AC with a 25 A DPST-NO contact rating. The steel enclosure carries a NEMA 3R rating for outdoor use. A synchronous clock motor drives the dial and includes a separate grounding terminal.
Included Trippers and Mounting
The unit ships with 24 trippers installed and supports up to 30 on/off cycles per day. Minimum on-time is 12 minutes and maximum is 23-3/4 hours. A manual override lever allows immediate control without changing the schedule. Extra trippers are available separately under part number 2E132 for expanded programming. The timer is panel-mount ready.
Outdoor Single-Circuit Control
This timer suits installers needing a single 24-hour schedule for pumps, lighting or HVAC loads up to 25 A. It does not support multiple independent circuits, 7-day programming or digital precision. Buyers requiring astronomic adjustment, battery backup or more than 30 daily switching events should consider other control types.
Highlights
- 24-hour scheduling with 12-minute minimum intervals
- 25 A DPST-NO switching at 208–277 V AC
- Steel NEMA 3R enclosure for outdoor durability
- 34 trippers enable up to 30 on/off cycles daily
- Synchronous motor plus manual override for reliable operation
Specifications
| Brand | INTERMATIC |
|---|---|
| Type | Car |
| Material | HAWA |
Questions about this item
How often should the synchronous clock motor be serviced or replaced?
The synchronous clock motor is a sealed, factory-lubricated unit designed for the life of the timer; no periodic service or replacement interval is required.
What limits continuous operation at the 25 A rating?
The 25 A rating applies up to the maximum ambient temperature listed on the nameplate; sustained loads above that temperature require derating.
How much heat does the steel enclosure dissipate when the timer runs all day?
The NEMA 3R steel enclosure is rated to dissipate the heat generated by the 25 A contacts and motor during continuous 24-hour operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
