We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with two LC fibre ports and gold PCIe x4 edge connector

Intel

Intel PRO/1000 PF EXPI9402PF dual-port Gigabit PCIe x4 network card

SKU CH-CPMN-YQ6CF

Dual-port Gigabit Ethernet adapter for PCIe x4 slots with a low-profile bracket included

  • Dual-port Gigabit throughput with 1000Base-SX connectivity
  • PCI Express x4 interface provides dedicated server bandwidth
  • Two ports enable link aggregation or failover redundancy
  • Low-profile bracket included for compact chassis installation
  • Plug-in card form factor simplifies server deployment

Dual-port Gigabit PCIe x4 server adapter

The Intel EXPI9402PF is a dual-port Gigabit Ethernet network card built for PCI Express x4 slots. It uses 1000Base-SX fibre optics for server and storage networking. A low-profile bracket is included for compact chassis.

Suits fibre-based server links.

This adapter targets administrators upgrading or repairing servers that require dual 1000Base-SX connections over multimode fibre. It is not for networks that rely exclusively on copper cabling, nor for systems that lack a PCIe x4 or larger slot.

1000Base-SX fibre interface

The deciding specification is the 1000Base-SX optical interface, which requires multimode fibre patch cables and compatible switch ports. Verify that your cabling plant and switch modules match this standard before purchasing.

Highlights

  • Dual-port Gigabit throughput with 1000Base-SX connectivity
  • PCI Express x4 interface provides dedicated server bandwidth
  • Two ports enable link aggregation or failover redundancy
  • Low-profile bracket included for compact chassis installation
  • Plug-in card form factor simplifies server deployment

Specifications

No published specifications for this item yet.

Questions about this item

Does the 1000Base-SX fibre link stay stable when both ports run at full 1000 Mbps throughput?

The card uses 1000Base-SX optics on each port, so line-rate gigabit traffic is supported on both ports simultaneously without protocol bottlenecks.

How much heat does the adapter produce when it operates continuously in a server chassis?

As a passive plug-in card with no onboard fan, it relies on chassis airflow; power draw is typical for a dual-port PCIe x4 Gigabit adapter.

Which fibre patch cables and SFP modules are required to connect the two ports?

Each port needs an SFP transceiver and a duplex multimode fibre patch cord with LC connectors for 1000Base-SX operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.