We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rugged metal wall-mount box with four PoE ports and two SFP uplinks

Inscape Data Corporation

Inscape Data Corporation LPS940F-300-T1 6-Port Gigabit PoE network switch

SKU CH-1CMV-J4RFM

Outdoor IP68-rated unmanaged Gigabit PoE switch with four powered ports, two SFP uplinks and 300 W total power budget

  • FormatWall Mountable
  • StandardsIEEE 802.3/3u/3ab, IEEE 802.3af
  • Network Management TypeUnmanaged
  • Uplink Ports2
  • Uplink InterfaceSFP
  • Primary Ports4 x PoE
  • IP68 rated enclosure withstands outdoor conditions
  • 90W per PoE port powers demanding devices
  • 300W total PoE budget supports four ports
  • 12 Gbps non-blocking switching capacity handles traffic
  • 93 Mpps forwarding rate at 64 byte frames

Outdoor IP68 6-Port Gigabit PoE Switch

The Inscape Data LPS940F-300-T1 is a contractor-grade unmanaged switch built for permanent outdoor deployment. Its IP68-rated enclosure withstands temperatures from -22ºF to +158ºF, making it suitable for security cameras, wireless access points and other remote powered devices that must operate year-round in exposed locations.

Wall-Mount Installation

The unit mounts directly to a wall or pole using the integrated brackets and accepts dual power inputs — 120V to 240V AC and/or 48V DC — for redundancy. Integrated 6KV Ethernet surge protection guards connected equipment against lightning and transient voltages. Because the switch is unmanaged, there is no software configuration; simply connect cables and apply power. The only common issue is exceeding the 300W total PoE budget when all four ports draw high power simultaneously.

300W Total PoE Budget Across Four Ports

Each of the four PoE ports can deliver up to 90W, compliant with IEEE 802.3af/at/bt, but the combined output must not exceed 300W. Two 1.25Gb SFP uplink ports provide fiber uplinks for long-distance backhaul. Verify that the aggregate power draw of your powered devices stays within the 300W limit; installations requiring more total power will need an additional switch or a higher-budget model.

Highlights

  • IP68 rated enclosure withstands outdoor conditions
  • 90W per PoE port powers demanding devices
  • 300W total PoE budget supports four ports
  • 12 Gbps non-blocking switching capacity handles traffic
  • 93 Mpps forwarding rate at 64 byte frames

Specifications

FormatWall Mountable
StandardsIEEE 802.3/3u/3ab, IEEE 802.3af
Network Management TypeUnmanaged
Uplink Ports2
Uplink InterfaceSFP
Primary Ports4 x PoE
MAC Address Table2K
PoEYes
Dimensions10x8x4 Inch
Weight7 Lb
Temperature-22ºF to +158ºF (-30ºC to +70ºC)

Questions about this item

How can I verify the LPS940F-300-T1 is operating correctly after mounting it outdoors?

Check that the four PoE ports deliver power to connected cameras or radios and that both SFP uplink ports show link activity; the switch runs silently with no management interface to configure.

What comes in the box with the LPS940F-300-T1 and what must I source separately?

The unit includes the IP68-rated switch enclosure with four PoE ports and two SFP uplinks; you must supply SFP transceivers, Ethernet cables, and a 120 V–240 V AC or 48 V DC power source.

Which PoE capacity should I choose for the four ports on the LPS940F-300-T1?

Each port can supply up to 90 W, but the total PoE budget is capped at 300 W, so plan device loads so their combined draw stays within that limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.