InHand Networks
InHand Networks IR302 Industrial 4G LTE Cat 4+ Wi-Fi Router
Industrial 4G LTE Cat 4 router with dual SIM failover, Wi-Fi 802.11b/g/n, VPN firewall, cloud management, and rugged metal casing rated for -20 to 70 °C
- Industrial metal casing withstands -20 to 70 °C
- Dual SIM slots enable carrier failover on LTE Cat 4 bands
- 80 m Wi-Fi reach with 802.11b/g/n AP, Client and WDS modes
- SPI firewall, DoS defence, ACL and OpenVPN secure data paths
- Cloud platform gives watchdog, VRRP backup and multi-WAN failover
Industrial LTE Router with Dual SIM
The InHand Networks IR302 is an industrial-grade 4G LTE Cat 4+ router designed for reliable connectivity in harsh environments. It features a rugged metal casing, dual SIM card slots for carrier redundancy, and supports LTE bands 2, 4, 5, 12, 13, 14, 66, and 71 alongside WCDMA bands 2, 4, and 5. Management is handled through the InHand Device Manager cloud platform.
Suited for Remote Monitoring and Failover Needs
This unit suits deployments requiring wide-temperature operation from -20 to 70 Celsius and a broad DC voltage range of 9 to 36 volts. It provides VPN, firewall, and SPI DoS protection for secure data transmission. It is not for installations that need multiple LAN ports or higher cellular categories beyond Cat 4.
LTE Cat 4+ with 802.11b/g/n Wi-Fi
The single specification that decides fit is the LTE Cat 4+ modem combined with 802.11b/g/n Wi-Fi in AP, Client, and WDS modes. This determines the maximum cellular throughput and wireless compatibility available for your M2M or IoT application.
Highlights
- Industrial metal casing withstands -20 to 70 °C
- Dual SIM slots enable carrier failover on LTE Cat 4 bands
- 80 m Wi-Fi reach with 802.11b/g/n AP, Client and WDS modes
- SPI firewall, DoS defence, ACL and OpenVPN secure data paths
- Cloud platform gives watchdog, VRRP backup and multi-WAN failover
Specifications
No published specifications for this item yet.
Questions about this item
Does the IR302 run hot or draw much power when operating continuously?
It operates from DC 9 V to 36 V and is rated for ambient temperatures up to 70 °C (158 °F) in a fanless metal enclosure.
What cabling or power supply must I already have to install this router?
You need a DC source between 9 V and 36 V and an Ethernet cable for the single LAN or the switchable WAN/LAN port.
Will the IR302 work with my existing 802.11b/g/n Wi-Fi devices?
Yes, its Wi-Fi radio supports 802.11b/g/n in AP, client or WDS mode so legacy clients can connect.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
