Ingersoll/Rand
Ingersoll/Rand P4FS-6 reciprocating saw blade 4 in 32 TPI 6 pack
Six bi-metal reciprocating saw blades, 4 in long with 32 TPI, cut thin metal, aluminium, nail-embedded wood and plastic
- MaterialHAWA
- Cuts thin metal cleanly with 32 teeth per inch
- Bi-metal blade resists wear in aluminium, plastic and soft metals
- Rigid straight-cut edge keeps lines true in nail-embedded wood
- 035 in thickness balances control and durability for reciprocating saws
- Six blades per pack keeps the job moving without downtime
4-inch 32 TPI bi-metal blades for metal work
This six-pack supplies 4-inch reciprocating saw blades with 32 teeth per inch for cutting thin metal, aluminum, nail-embedded wood, plastic and soft metals. The bi-metal construction and rigid straight-back design suit straight cuts in sheet material and light fabrication tasks.
Consistent cutting through thin stock
The fine 32 TPI pitch keeps the blade engaged in thin metal and aluminum without snagging, so cutting speed stays steady during extended runs. Bi-metal teeth resist wear when the cut continues through nail-embedded wood or plastic, reducing the need for mid-job blade changes.
Low vibration and minimal heat buildup
The .035-inch blade thickness and straight back limit deflection, which keeps vibration low and prevents excess heat during normal use. Air-driven saws run cooler with these blades because the narrow kerf removes less material, lowering power demand and noise in the workshop.
Highlights
- Cuts thin metal cleanly with 32 teeth per inch
- Bi-metal blade resists wear in aluminium, plastic and soft metals
- Rigid straight-cut edge keeps lines true in nail-embedded wood
- 035 in thickness balances control and durability for reciprocating saws
- Six blades per pack keeps the job moving without downtime
Specifications
| Brand | INGERSOLL RAND |
|---|---|
| Material | HAWA |
Questions about this item
Does the 32 TPI blade run cooler when cutting thin metal all day?
The 32 teeth per inch on this bi-metal blade produce finer chips, which reduces friction and heat build-up during extended thin-metal cutting.
What saw shank does the 4-inch blade need to fit my reciprocating saw?
The blade uses a standard straight-back shank that fits most reciprocating saws accepting 4-inch blades.
Will the 0.035-inch thick blade track straight in my older saw?
The rigid straight-back design keeps the blade aligned for straight cuts even on older reciprocating saws with worn clamps.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
