Ingersoll/Rand
Ingersoll/Rand F71IHE coalescing filter element 0.01 micron microglass
Removes oil and water aerosols from compressed air down to 0.01 micron using microglass media
- Removes oil and water aerosols down to 0.01 micron
- Microglass media provides high-efficiency coalescing filtration
- Designed for compressed air systems requiring clean, dry air
- Compatible with Ingersoll-Rand F71IH filter housings
- New genuine Ingersoll-Rand replacement element ensures reliable performance
Coalescing filter for compressed air
The Ingersoll-Rand F71IHE is a coalescing filter element designed for high-efficiency oil removal from compressed air systems. It uses a microglass media rated at .01 micron to capture fine aerosols and solid particles. The element suits maintenance teams and plant engineers who need reliable contamination control in pneumatic lines. It fits housings that accept the F71IH part number.
Microglass media and compatibility
The microglass construction provides the fine pore structure needed to achieve the .01 micron rating for oil and water aerosol coalescence. This media choice supports consistent flow with low pressure drop across the element. The filter is confirmed compatible with Grainger part number 3EMF4 and manufacturer part number F71IH, simplifying identification during reorder or cross-reference checks.
Oil and water aerosol removal capacity
Rated at .01 micron, the element comfortably handles fine oil mist and water aerosols in general shop air and instrument air applications. It removes sub-micron contaminants that standard particulate filters miss, protecting downstream tools and processes. The filter is not suited for bulk liquid separation or high-volume water slugs, which require a separate separator upstream. It also does not remove oil vapour or gaseous contaminants.
Highlights
- Removes oil and water aerosols down to 0.01 micron
- Microglass media provides high-efficiency coalescing filtration
- Designed for compressed air systems requiring clean, dry air
- Compatible with Ingersoll-Rand F71IH filter housings
- New genuine Ingersoll-Rand replacement element ensures reliable performance
Specifications
| Brand | INGERSOLL-RAND |
|---|
Questions about this item
How often should the F71IHE coalescing filter element be replaced?
Replace the element when the pressure drop across it reaches the limit recommended by your compressor manufacturer, typically every 4 000 to 8 000 operating hours in normal service.
What limits the F71IHE element during continuous operation?
The 0.01 micron microglass media gradually loads with oil and water aerosols, increasing pressure drop until the element must be changed.
Does the F71IHE element add noticeable noise, heat or power draw when the compressor runs all day?
The filter element itself has no moving parts and adds no noise, heat or electrical load; only a small, steady pressure drop occurs across the housing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
