Ingersoll/Rand
Ingersoll/Rand ES70P Production Screwdriver 10-26 in-lb 700 RPM
Corded production screwdriver delivers adjustable torque from 10 to 26 in-lb at 700 RPM with shut-off clutch and reversible variable speed
- Adjustable torque from 10 to 26 in-lb for precise fastening
- 700 RPM free speed enables rapid production cycles
- Shut-off clutch prevents over-tightening and protects components
- Reversible with continuous variable speed for flexible control
- 10 ft cord with two-prong plug suits workshop layouts
Production Screwdriver 10-26 in-lb
The Ingersoll/Rand ES70P is a corded production screwdriver built for repetitive assembly work. Its shut-off clutch stops the motor at the preset torque, delivering consistent fastening on every cycle. The straight drive configuration and 1/4 in quick-change chuck suit high-volume bench or line use. Operators who need repeatable torque control in a mains-powered tool will find it suitable.
Sustained-load behaviour
A brushless motor is not fitted, so the tool relies on a conventional motor rated for heavy-duty duty cycles. Continuous variable speed up to 700 RPM lets the user match speed to the joint without discrete steps. The shut-off clutch maintains torque accuracy across long runs, reducing operator fatigue during extended shifts. The 10 ft cord and 0.4 A draw support stationary workstation setups.
Pre-order checks
Verify that a standard two-prong mains outlet is available at the work station. Confirm the 10 ft cord reaches the intended fastening point without an extension lead. Ensure the 1/4 in hex quick-change bits match the fasteners used in your assembly process. Buyers who need cordless mobility or a lower minimum torque than 10 in-lb should consider other tool types.
Highlights
- Adjustable torque from 10 to 26 in-lb for precise fastening
- 700 RPM free speed enables rapid production cycles
- Shut-off clutch prevents over-tightening and protects components
- Reversible with continuous variable speed for flexible control
- 10 ft cord with two-prong plug suits workshop layouts
Specifications
| Brand | INGERSOLL-RAND |
|---|
Questions about this item
How much current does the ES70P draw when running all day?
The screwdriver draws 0.4 A at full load, so continuous operation keeps power consumption low.
What power source must I already have for this corded screwdriver?
You need a standard two-prong outlet; the 10 ft cord plugs directly in with no transformer required.
Will the 1/4 in quick-change chuck accept the hex bits I already own?
Yes, the 1/4 in hex quick-change chuck works with any standard 1/4 in hex insert bits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
