Ingersoll/Rand
Ingersoll/Rand AM-30 Replacement Module for PSG-30 pneumatic components power
Replacement module for PSG-30 pneumatic systems with 390 cfm maximum flow rate for oil and water separation
- Direct replacement for PSG-30 pneumatic systems
- Oil and water separation protects downstream equipment
- PolySep series rated for 390 cfm flow
- Compatible with Grainger part 11U221 reference
- New Ingersoll-Rand module ready for installation
Replacement Module for PSG-30 Systems
This Ingersoll-Rand AM-30 module serves as a direct replacement component for PSG-30 pneumatic power units. It functions as a compressed air filter element designed to separate oil and water from the air stream. Maintenance technicians and facility engineers use it to restore filtration performance in existing PolySep series installations. The part corresponds to Grainger reference 11U221 for cross-reference purposes.
Oil and Water Separation at 390 cfm
The filter element handles a maximum flow rate of 390 cfm while removing oil and water contaminants from compressed air lines. It operates continuously within the PolySep series framework to maintain air quality for downstream pneumatic tools and equipment. Sustained performance depends on the condition of the incoming air and the maintenance schedule followed. The separator media captures liquid aerosols before they reach sensitive components.
Direct Fit Installation With Cross-Reference Check
Installation involves removing the spent filter element from the PSG-30 housing and seating the AM-30 replacement in its place. No special tools are required beyond standard access to the filter bowl. The most common issue is ordering the wrong part when the PSG-30 designation is overlooked or when the 11U221 cross-reference is not verified. Buyers who need a different flow capacity or a filter for dry particulate only should confirm specifications before purchase.
Highlights
- Direct replacement for PSG-30 pneumatic systems
- Oil and water separation protects downstream equipment
- PolySep series rated for 390 cfm flow
- Compatible with Grainger part 11U221 reference
- New Ingersoll-Rand module ready for installation
Specifications
| Brand | INGERSOLL RAND |
|---|
Questions about this item
How much heat or noise does the AM-30 module add when the PSG-30 runs continuously?
The AM-30 is a passive oil/water separator element with no motor or fan, so it generates no additional heat or noise during continuous PSG-30 operation.
What existing PSG-30 hardware must I already have for this AM-30 replacement module to install correctly?
The AM-30 fits the PSG-30 PolySep series housing; you need the existing PSG-30 filter vessel and its mounting connections to install this element.
Will the AM-30 work alongside the original PSG-30 components already on my compressor line?
Yes, the AM-30 is the direct replacement element for the PSG-30 series and maintains the 390 cfm maximum flow rating with the existing PolySep housing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
