Ingersoll/Rand
Ingersoll/Rand Air Ratchet Wrench General Duty 8-2/5 In
An air-powered ratchet wrench delivering 25 ft-lb fastening torque at 250 RPM free speed
- TypeGeneral Duty
- Delivers 25 ft-lb torque for reliable fastening
- Operates at 90 psi for consistent pneumatic power
- Free speed of 250 RPM speeds up repetitive tasks
- Weighs only 1.5 lb to reduce operator fatigue
- Compact 8-2/5 in length fits tight workspaces
What this tool is
The Ingersoll Rand air ratchet wrench is a general-duty pneumatic tool built for fastening tasks that require moderate torque. It delivers 25 ft-lb of fastening torque at a free speed of 250 RPM. The compact 8-1/2 inch overall length and 1.5 lb weight allow access in tight engine bays and under dashboards. A 1/4 inch square drive with ball-detent retainer secures sockets during use.
Check your air supply
Verify that your compressor can provide a steady 90 psi at 3 cfm to match the tool’s rated consumption. The inlet accepts a 1/4 inch NPT female fitting and the manufacturer specifies a minimum 3/8 inch hose bore to avoid pressure drop. Rear exhaust directs air away from the work area. Ensure your supply line and fittings meet these requirements before connecting the wrench.
Who this suits
Technicians needing a lightweight ratchet for light assembly, remove-and-replace jobs, or general maintenance will find the torque and speed adequate. Shops that already run 90 psi lines with 3/8 inch hose can add it without changes. Buyers who need higher torque for suspension or heavy driveline fasteners should look at a larger-drive impact wrench instead.
Highlights
- Delivers 25 ft-lb torque for reliable fastening
- Operates at 90 psi for consistent pneumatic power
- Free speed of 250 RPM speeds up repetitive tasks
- Weighs only 1.5 lb to reduce operator fatigue
- Compact 8-2/5 in length fits tight workspaces
Specifications
| Brand | Ingersoll-Rand |
|---|---|
| Type | General Duty |
Questions about this item
What comes with the air ratchet and what must I supply separately?
The tool itself is included. You must provide an air compressor capable of 90 psi, a 3/8 in minimum hose, and a 1/4 in NPT female fitting to connect the 1/4 in air inlet.
How do I choose between the listed specifications for this general duty model?
This is a single general duty configuration with a 1/4 in square drive, 25 ft-lb fastening torque, 250 RPM free speed and 3 cfm air consumption; no alternative versions or capacities are offered.
What does the 25 ft-lb torque rating mean when I use the wrench on a real job?
At 90 psi the ratchet delivers up to 25 ft-lb of fastening torque at 250 RPM, suitable for general duty tightening and loosening with the 1/4 in square drive and ball detent retainer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
