Ingersoll/Rand
INGERSOLL-RAND 7S60L Air Disc Sander 7 in 6000 RPM 0.8 hp
Pneumatic disc sander with a 7-inch pad, 6000 RPM speed and 0.8 hp motor for heavy-duty material removal
- Heavy-duty sanding power from 0.8 hp motor
- Variable speed control up to 6000 RPM for versatile material removal
- 7 inch pad capacity handles large surface areas efficiently
- Pistol grip with side handle improves operator comfort and control
- 16 cfm air consumption at 90 psi ensures consistent performance
7 in 0.8 hp Air Disc Sander
The INGERSOLL-RAND 7S60L is a pneumatic disc sander built for heavy-duty material removal and surface preparation. It accepts 7 in abrasive discs on a 5/8 in - 11 threaded spindle and runs at a maximum speed of 6000 RPM. The pistol-grip design includes a side handle for two-handed control during aggressive sanding tasks. This tool is intended for professional automotive and industrial workshops with a compressed-air supply.
Sustained Load Behaviour
Rated at 0.8 hp for heavy duty cycles, the motor maintains torque under continuous load when fed with 16 cfm at 90 psi. Variable speed control lets the operator match disc speed to the material, reducing gouging during extended passes. The non-vacuum configuration means dust extraction must be managed separately to keep the work area visible and the abrasive cutting efficiently. A 3/8 in minimum hose size and 1/4 in NPT inlet minimise pressure drop across long supply lines.
Upgrade Context
This sander replaces smaller-diameter or lower-horsepower air sanders that stall on wide panels or thick coatings. The jump is worth it when the job demands consistent 7 in coverage and the compressor can deliver the required 16 cfm flow. Shops limited to lighter air supply or needing integrated dust collection will find the specification mismatched to their infrastructure. The Proposition 65 notice indicates chemical exposure considerations for the workplace.
Highlights
- Heavy-duty sanding power from 0.8 hp motor
- Variable speed control up to 6000 RPM for versatile material removal
- 7 inch pad capacity handles large surface areas efficiently
- Pistol grip with side handle improves operator comfort and control
- 16 cfm air consumption at 90 psi ensures consistent performance
Specifications
| Brand | INGERSOLL-RAND |
|---|
Questions about this item
How much air does the 7S60L consume when running continuously at 6000 RPM?
The sander draws 16 cfm at 90 psi, so a compressor that can sustain that flow is needed for all-day use.
What compressor fittings and hose size must I already have to connect the 1/4 in NPT inlet?
You need a 1/4 in NPT coupler and at least a 3/8 in ID hose to meet the minimum hose size requirement.
Will the 5/8 in - 11 spindle accept the 7 in discs I already use on my older sander?
Yes, the spindle thread is 5/8 in - 11 and the tool is built for 7 in discs, matching common legacy pads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
