We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Amber air tool oil in a one gallon bottle

Ingersoll/Rand

Ingersoll/Rand 50G Air Tool Oil Amber 1 gal Bottle accessory

SKU CH-3ACP-CV8RV

Air-tool lubricant with ISO 75 viscosity, amber colour, 1 gal bottle, operating range 0 to 250 °F, flash point 425 °F, specific gravity 0.88, UL listed and FDA approved

  • ISO VG 75 viscosity protects pneumatic tools
  • Conventional oil base lubricates grinders, hoists, impact wrenches, winches
  • Operates from 0 °F to 250 °F in demanding environments
  • Flash point 425 °F adds high-temperature safety margin
  • UL listed and FDA approved for regulated applications

Air Tool Lubricant for Pneumatic Equipment

Ingersoll-Rand 50G oil is a conventional amber lubricant formulated for grinders, hoists, impact wrenches and winches. It carries an ISO viscosity grade of 75 and a viscosity index of 75. The fluid operates between 0 and 250 degrees F with a flash point of 425 degrees F. It is UL listed and FDA approved but not food grade.

Simple Pour-and-Use Application

The one-gallon bottle pours directly into tool reservoirs or automatic oilers without special fittings. Overfilling can cause excess exhaust mist and wasted fluid. Contamination from dirt or water degrades the oil and accelerates component wear. The pour point of 0 degrees F means the oil stays fluid in cold shops, but storage below that temperature should be avoided.

Verify Tool Requirements Before Ordering

Check the manufacturer's recommended viscosity grade and base oil type for each pneumatic tool. Confirm the reservoir capacity so the one-gallon container covers your maintenance interval. Ensure the operating temperature range of 0 to 250 degrees F matches the tool's duty cycle. The specific gravity is 0.88 if weight-based mixing calculations are needed.

Highlights

  • ISO VG 75 viscosity protects pneumatic tools
  • Conventional oil base lubricates grinders, hoists, impact wrenches, winches
  • Operates from 0 °F to 250 °F in demanding environments
  • Flash point 425 °F adds high-temperature safety margin
  • UL listed and FDA approved for regulated applications

Specifications

BrandINGERSOLL RAND

Questions about this item

How do I confirm the oil is performing correctly after filling my air tool?

Proper lubrication shows as a fine amber mist at the exhaust and smooth, consistent tool speed under load; the ISO 75 viscosity and 75 viscosity index maintain film strength from 0 °F to 250 °F.

What comes in the package and what must I supply separately?

The package contains one 1-gallon bottle of amber ISO VG 75 air tool oil; you must provide the air tool, its lubricator or oiler fitting, and any required adapters.

Which viscosity grade should I select for general pneumatic tool use?

This single offering is ISO Viscosity Grade 75 with a viscosity index of 75, suitable for grinders, hoists, impact wrenches and winches operating between 0 °F and 250 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.