Ingersoll/Rand
Ingersoll/Rand 429 8-1/4" General Duty Aluminum Reciprocating Air Saw
Air-powered reciprocating saw cuts flat and curved surfaces at up to 10,000 strokes per minute with a 3/8 inch stroke and includes six blades
- Lightweight handling with 1.33 lb tool weight
- High cutting speed at 10,000 strokes per minute
- Versatile cuts on flat and curved surfaces
- Ready to use with six included blades
- Adjustable shoe for controlled cutting depth
8-1/4" Air Reciprocating Saw
The Ingersoll Rand 429 is a lightweight pneumatic reciprocating saw built for general-duty cutting of flat and curved surfaces. It runs on compressed air at 90 psi and delivers up to 10,000 strokes per minute with a 3/8 inch straight stroke. The aluminum body weighs 1.33 lb and includes six high-speed steel blades and two hex wrenches.
Installation notes
Connect the 1/4 inch NPT air inlet to a supply line of at least 3/8 inch inner diameter to meet the 9 cfm consumption. No variable-speed control is fitted, so the trigger provides simple on/off operation. The adjustable shoe helps stabilise the cut, but blade changes require the supplied hex wrenches; losing them will halt work until replacements are found.
Pre-purchase checks
Verify your compressor can sustain 90 psi continuously while delivering 9 cfm, otherwise the saw will stall under load. Confirm the hose and fittings match the 1/4 inch NPT inlet and 3/8 inch minimum hose size. Note the Proposition 65 warnings for chemicals linked to cancer and reproductive harm, and ensure the general-duty rating suits the intended workload.
Highlights
- Lightweight handling with 1.33 lb tool weight
- High cutting speed at 10,000 strokes per minute
- Versatile cuts on flat and curved surfaces
- Ready to use with six included blades
- Adjustable shoe for controlled cutting depth
Specifications
| Brand | INGERSOLL-RAND |
|---|
Questions about this item
How can I confirm the saw is running at the rated 10,000 strokes per minute after connecting the air supply?
At 90 psi the tool should deliver its maximum 10,000 strokes per minute; verify the air regulator reads 90 psi and listen for consistent, high-speed reciprocation without hesitation.
Which accessories are included and what must I supply myself?
The box contains two hex wrenches and six high-speed steel cutting blades; you must provide a 3/8 in minimum hose, a 1/4 in NPT air fitting and a compressed-air source capable of 9 cfm at 90 psi.
Is the 429 model the only capacity offered for this reciprocating air saw?
The listed product is the 429 model with a 3/8 in stroke length and 1.33 lb weight; no alternative stroke lengths or capacities are described in the specifications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
