Ingersoll/Rand
Ingersoll/Rand 24241952 FA110IG Air Filter 1 micron Microglass
1-micron Microglass coalescing filter element removes oil and water from compressed air systems
- 1 micron coalescing rating removes fine oil and water aerosols
- Microglass filter media provides high efficiency particle capture
- FA110IG compatible element fits designated Ingersoll-Rand systems
- Coalescing filter type separates liquid contaminants from compressed air
- Part number 24241952 identifies the genuine replacement element
Product identity
This Ingersoll/Rand compressed-air filter element carries part number 24241952 and uses a Microglass coalescing media rated at 1 micron. It is designed for pneumatic systems that must remove oil and water aerosols from the air stream. The element fits equipment specifying the FA110IG compatible part number.
Filtration performance
The coalescing Microglass structure captures sub-micron liquid droplets and solid particles down to the rated 1 micron level. By removing oil and water contamination the filter protects downstream valves, tools and instrumentation from fouling and corrosion. Pressure drop across a clean element remains within the limits expected for this class of coalescing cartridge.
Fit and replacement
The cartridge is a direct replacement for units calling out FA110IG, so installation requires no adapter kits or housing modifications. No separate seals, brackets or lubricants are included in the package. Maintenance intervals depend on inlet contamination levels and flow rate rather than a fixed calendar schedule.
Highlights
- 1 micron coalescing rating removes fine oil and water aerosols
- Microglass filter media provides high efficiency particle capture
- FA110IG compatible element fits designated Ingersoll-Rand systems
- Coalescing filter type separates liquid contaminants from compressed air
- Part number 24241952 identifies the genuine replacement element
Specifications
| Brand | INGERSOLL-RAND |
|---|
Questions about this item
How do I install the FA110IG filter element and what step is often missed?
Shut off and depressurise the compressed-air line, unscrew the filter bowl, remove the old element, insert the new Microglass element with the flow arrow pointing downstream, then reinstall the bowl and torque to the housing specification — the arrow direction is the step most often missed.
What maintenance or replacement will the 1 micron Microglass element need later?
The coalescing element loads with oil and water aerosols over time; replace it when the pressure drop across the housing reaches the limit stated in the compressor manual or at the scheduled service interval for FA110IG elements.
What limit appears first on the 1 micron Microglass element during sustained use?
The pressure differential across the element rises as it captures oil and water aerosols; when that differential hits the maximum allowed by the compressor manufacturer the element must be changed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
