Ingersoll/Rand
Ingersoll/Rand 2125PTiMAX Air Impact Wrench 1/2 in 15000 rpm
Air-powered 1/2 in impact wrench delivers 332 ft-lb breakaway torque at 15,000 rpm with four speed settings for industrial use
- TypeBent Nose Pliers
- Delivers 332 ft-lb breakaway torque for stubborn fasteners
- 15,000 rpm free speed accelerates bolt removal
- 251 ft-lb fastening torque handles heavy-duty assembly
- Four speed settings match power to the task
- 2 ft-lb/lb power-to-weight ratio maximises efficiency
1/2-inch air impact wrench for industrial fastening
The Ingersoll/Rand 2125PTiMAX is a new pneumatic impact wrench built for industrial duty. It delivers 332 ft-lb of breakaway torque and 251 ft-lb of fastening torque. A free speed of 15000 rpm and 1500 impacts per minute drive fasteners quickly. Four speed settings give the operator control over power output.
17 cfm air consumption at 90 psi
This tool requires a compressed-air supply rated at 17 cfm and 90 psi minimum pressure. The inlet accepts 1/4-inch NPT fittings and the minimum hose size is 3/8 inch. Exhaust exits from the bottom of the housing. Meeting these air requirements is the single specification that determines whether the wrench will perform as rated.
Suits mechanics with adequate compressor capacity
Technicians who can provide 17 cfm at 90 psi through a 3/8-inch hose will get full torque and speed. Buyers whose air system falls short on flow or pressure should look at something else. The tool carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.
Highlights
- Delivers 332 ft-lb breakaway torque for stubborn fasteners
- 15,000 rpm free speed accelerates bolt removal
- 251 ft-lb fastening torque handles heavy-duty assembly
- Four speed settings match power to the task
- 2 ft-lb/lb power-to-weight ratio maximises efficiency
Specifications
| Brand | Ingersoll-Rand |
|---|---|
| Model | 2125PTiMAX |
| Type | Bent Nose Pliers |
Questions about this item
How does 15,000 rpm free speed translate to real‑world bolt work?
The 15,000 rpm free speed drives 1,500 impacts per minute, delivering up to 332 ft‑lb breakaway torque and 251 ft‑lb fastening torque on 1/2‑in bolts.
What air supply does the 1/4‑in NPT inlet require to hit rated torque?
It needs 17 cfm at 90 psi through a minimum 3/8‑in hose; pressure must stay between 90 and 100 psi for full output.
What clearance and mounting does the bent‑nose body need?
The bent‑nose profile fits tight engine bays; it mounts on any 1/2‑in square drive socket and connects via the 1/4‑in NPT air inlet.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
