Ingersoll/Rand
Ingersoll/Rand 1RANC1 Air Screwdriver 1/8 in NPT Pistol Grip 30.1 in-lb
Pistol-grip air screwdriver with adjustable cushion clutch delivering 1.5 to 30.1 in-lb torque at 1,000 RPM free speed
- TypeAngle Drivers
- Adjustable cushion clutch gives precise torque control from 1.5 to 30.0 in-lb
- 1,000 RPM free speed drives fasteners quickly in production environments
- 1/8 in NPT air inlet connects directly to standard shop supply lines
- 8 1/2 in overall length fits tight work areas while maintaining grip comfort
- 1/4 in quick-change hex chuck swaps bits in seconds without tools
Air screwdriver with adjustable cushion clutch
The Ingersoll/Rand 1RANC1 is a pneumatic pistol-grip screwdriver built for industrial duty cycles. It delivers a soft-draw torque range of 1.5 to 30.0 in-lb and a maximum torque of 30.1 in-lb. A 1/4 in hex quick-change chuck accepts standard bits for rapid changeover. Free speed reaches 1,000 RPM under 90 psi supply pressure.
Air consumption and hose requirements
Average air consumption is 5.00 CFM over a 15 second run time and 13.0 CFM at full load. The tool requires a minimum 1/4 in hose and connects via a 1/8 in NPT inlet. Sustained operation depends on a compressor that can maintain 90 psi at the required flow. Insufficient supply will reduce torque consistency and speed.
Replaces fixed-clutch or manual drivers
This model upgrades from fixed-torque or hand-driven fastening where repeatable, adjustable torque is needed. The cushion clutch reduces over-torque risk on soft joints. It is not suited for applications needing torque above 30.1 in-lb or for environments without a 90 psi compressed-air system.
Highlights
- Adjustable cushion clutch gives precise torque control from 1.5 to 30.0 in-lb
- 1,000 RPM free speed drives fasteners quickly in production environments
- 1/8 in NPT air inlet connects directly to standard shop supply lines
- 8 1/2 in overall length fits tight work areas while maintaining grip comfort
- 1/4 in quick-change hex chuck swaps bits in seconds without tools
Specifications
| Brand | Ingersoll-Rand |
|---|---|
| Type | Angle Drivers |
Questions about this item
How do I choose between the soft-draw torque range and the maximum torque rating?
The soft-draw range of 1.5 to 30.0 in-lb covers adjustable fastening tasks, while the maximum torque of 30.1 in-lb is the peak output for tougher joints.
What does the 1,000 RPM free speed mean for actual driving time?
At 1,000 RPM free speed, the tool drives fasteners quickly under no load, though speed drops under the 13.0 CFM full-load air demand.
How does the 1/8 in NPT air inlet and 90 psi requirement affect compressor sizing?
The 1/8 in NPT inlet needs a 1/4 in hose supplying 90 psi, with average consumption of 5.00 CFM over 15 seconds and 13.0 CFM at full load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
