Ingersoll/Rand
Ingersoll/Rand 172L Air Chisel Scaler 5500 BPM 9/16" Stroke 0.94" Bore
Industrial-duty air chisel scaler delivers 5500 blows per minute with a 9/16" stroke and 0.94" bore for heavy material removal
- MaterialHAWA
- Delivers 5500 blows per minute for rapid scaling
- 9/16 inch stroke provides strong material removal
- 94 inch bore supports consistent power output
- 0 CFM average consumption suits standard shop compressors
- Bayonet needle lock enables quick chisel changes
Ingersoll-Rand 172L Air Chisel Scaler
This Ingersoll-Rand 172L air chisel scaler delivers 5500 blows per minute with a 9/16 inch stroke and 0.94 inch bore. It accepts a 1/2 inch square shank and uses a bayonet needle housing lock for fast chisel changes. The in-line body style and lever throttle suit industrial-duty scaling and chipping tasks.
Check air supply and hose before use
The tool requires 90 psi operating pressure and a minimum 5/16 inch hose. Average air consumption is 6.0 CFM during a 15 second run and 12.0 CFM at full load. Confirm your compressor can sustain this flow and that the 1/4 inch NPT inlet matches your fittings. California Proposition 65 warnings apply to this product.
Thermals noise and power draw in normal use
Air consumption of 12.0 CFM at full load determines the compressor duty cycle needed for continuous operation. The ergonomic in-line design helps manage vibration during extended scaling work. No electric motor or internal cooling system is present, so heat and noise levels depend on the compressor and the work material.
Highlights
- Delivers 5500 blows per minute for rapid scaling
- 9/16 inch stroke provides strong material removal
- 94 inch bore supports consistent power output
- 0 CFM average consumption suits standard shop compressors
- Bayonet needle lock enables quick chisel changes
Specifications
| Brand | INGERSOLL RAND |
|---|---|
| Material | HAWA |
Questions about this item
Does the 172L scaler come with chisels or must they be bought separately?
The 172L scaler uses a 1/2 in square shank and accepts chisels such as Mfr. No. 380, 382, 383, 383-12 and 384, which are not included and must be purchased separately.
Which chisel models fit the 1/2 in square shank on the 172L?
Compatible chisels are Mfr. No. 380, 382, 383, 383-12 and 384, all of which mount on the 1/2 in square shank with the bayonet needle housing lock.
What air supply is needed to reach 5500 BPM on the 172L?
The tool requires 90 psi at the inlet, a minimum 5/16 in hose, and delivers 6.0 CFM average at 15 seconds run time or 12.0 CFM at full load to sustain 5500 blows per minute.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
