We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue one gallon bottle of Ingersoll Rand air tool oil

Ingersoll/Rand

Ingersoll/Rand 10GW Air Tool Oil 1 gal Bottle Blue

SKU CH-1DM4-GVW4M

ISO VG 40 conventional air-tool oil in a 1 gal bottle, rated from 0 to 250 °F with a 320 °F flash point and 0.88 specific gravity

  • ISO VG 40 viscosity ensures consistent lubrication
  • Blue colour allows instant level checks
  • 1 gal bottle covers high-volume shop needs
  • Operates from 0 to 250 °F without breakdown
  • Flash point 320 °F adds safety margin

Air Tool Oil for Percussive and Impact Tools

This Ingersoll-Rand oil is formulated for percussive, assembly and impact-wrench applications. The blue fluid carries an ISO viscosity grade of 40 and a viscosity index of 40. It operates between 0 and 250 degrees Fahrenheit with a flash point of 320 degrees Fahrenheit.

Replaces generic compressor oils that lack

The conventional base oil and specific gravity of 0.88 suit tools that demand consistent film strength under shock loading. Upgrading is worthwhile when existing lubricant breaks down above 250 degrees Fahrenheit or fails to protect impact mechanisms during extended cycles.

Verify tool manufacturer oil specification

Confirm the equipment manual calls for an ISO 40 viscosity grade and a non-food-grade conventional oil. Ensure the one-gallon bottle fits your storage and dispensing setup before ordering.

Highlights

  • ISO VG 40 viscosity ensures consistent lubrication
  • Blue colour allows instant level checks
  • 1 gal bottle covers high-volume shop needs
  • Operates from 0 to 250 °F without breakdown
  • Flash point 320 °F adds safety margin

Specifications

BrandINGERSOLL RAND

Questions about this item

Does the 1 gal bottle need a pump or pour spout to fit my air-tool oiler?

The oil is supplied in a 1 gal bottle; use a compatible pour spout or pump that fits the bottle neck to fill your tool's reservoir without spillage.

What is the correct way to add this ISO 40 oil to an impact wrench, and what step is often missed?

Disconnect air supply, drain old oil, then fill to the manufacturer's indicated level; the step often missed is cycling the tool briefly to purge air pockets before returning to service.

How often should I replace this conventional air-tool oil in a percussive impact wrench?

Replace the oil when it darkens, emulsifies, or after the interval specified by the tool maker; the 1 gal container provides enough volume for many changes over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.