We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black monitor-clamp soundbar, 24.8 inches wide, USB-A to USB-C cable

INGA MZ-631 2.0 USB-A/C 10 W monitor-clamp speaker

SKU CH-QJY4-2EXVX

A 2.0 USB-A/C speaker clamps to monitors up to 1.5 inches thick, delivering 10 W from dual drivers and a passive radiator

  • TypeMonitor
  • ColorBlack
  • Configuration2.0
  • Connector TypeUSB-A TO USB-C
  • Total Power10 watts
  • Satellite RMS Power /ea10 watts
  • Balanced sound from dual drivers and a passive radiator
  • Single USB cable carries audio and power, no batteries needed
  • Clamps to monitors up to 1.5 inches thick, saving desk space
  • Top-mounted buttons for volume, mute and power with one-touch mute
  • Lifetime technical support included

INGA MZ-631 Monitor-Clamp Speaker

The INGA MZ-631 is a 2.0 stereo speaker that clamps to a monitor up to 1.5 inches thick. It draws power and audio from a single USB-A or USB-C port and delivers 10 watts of total output. The unit suits office workers, students and casual gamers who want richer sound without sacrificing desk space.

Clamp Installation and Common Issues

The spring-loaded clamp opens wide enough for most flat-back monitors and uses silicone pads to prevent scratches. No drivers or 3.5 mm cable are needed; plug the USB lead in and the system recognises the device immediately. Curved-back monitors cannot be used because the clamp requires a flat mounting surface.

10-Watt USB-Powered Output

Total power is rated at 10 watts from a 5 V USB supply, so the speaker will not exceed the port’s current limit. The frequency response reaches 20000 KHz and a passive radiator assists the dual dynamic drivers. Buyers who need higher SPL, a separate subwoofer or Bluetooth connectivity should look elsewhere.

Highlights

  • Balanced sound from dual drivers and a passive radiator
  • Single USB cable carries audio and power, no batteries needed
  • Clamps to monitors up to 1.5 inches thick, saving desk space
  • Top-mounted buttons for volume, mute and power with one-touch mute
  • Lifetime technical support included

Specifications

BrandINGA
ModelMZ-631
TypeMonitor
ColorBlack
Configuration2.0
Connector TypeUSB-A TO USB-C
Total Power10 watts
Satellite RMS Power /ea10 watts
Driverdynamic_driver
Frequency Response20000 KHz
Power Supply5 volts_of_direct_current
Remotepush_button
Dimension3.2 in x 24.8 in x 4.7 in
Weight0.35 kilograms

Questions about this item

How do I know the MZ-631 is working correctly after clamping it to my monitor?

Plug the USB cable into your computer; the speaker draws 5 V DC power and audio over the same connection. Press the power button on top — a tone or system sound confirms the 10 W 2.0 drivers and passive radiator are active.

What comes in the box with the INGA MZ-631 and what must I buy separately?

The package includes the monitor-clamp speaker bar, a 5-foot USB-A to USB-C cable and a USB-C to USB-A adapter. No 3.5 mm AUX cable, batteries or software are required; everything needed for plug-and-play operation is supplied.

Which version should I choose between the MZ-631 and the MZ-631M?

The MZ-631 is a 2.0 stereo speaker with four top-mounted controls for volume, mute and power. The MZ-631M adds a detachable microphone for calls and streaming; pick it only if you need voice input.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.