In Win
In Win RS104-02SN-S500.H.R 1U server chassis 400W 80+ Gold 4×2.5/3.5 hot-swap 12Gb/s SAS SATA
A 1U server chassis with four hot-swap 2.5/3.5-inch bays, dual internal 2.5-inch slots, a 400W 80+ Gold supply and 12Gb/s SAS/SATA backplane
- 12 Gb/s SAS and SATA backplane keeps storage fast
- Four hot-swap trays accept 2.5" or 3.5" drives
- Two internal 2.5" bays add extra capacity
- 400 W 80+ Gold supply cuts energy waste
- 40 × 28 mm PWM fans with anti-vibration cool quietly
1U 4-Bay Hot-Swap Server Chassis
This 1U short-depth chassis supports four 2.5 or 3.5-inch hot-swap drives on a 12Gb/s SAS 3.0 and SATA 3 backplane. It includes a 400W 80+ Gold power supply and two internal 2.5-inch drive bays. Two easy-swap 40 x 28mm PWM fans with anti-vibration mounts provide cooling. A built-in info-tag assists with system management.
Storage-Focused 1U Builds
Suits deployments needing dense front-access storage in a shallow rack footprint with redundant-class cooling fans. The four hot-swap trays accept both 2.5 and 3.5-inch SAS or SATA drives. Builds requiring PCIe expansion slots for add-in cards or GPU support should consider other platforms. The fixed 400W power supply limits high-wattage CPU configurations.
12Gb/s SAS 3.0 Backplane
The Mini-SAS HD backplane runs at 12Gb/s and handles SAS 3.0 and SATA 3 protocols for the four hot-swap bays. This single spec decides if the chassis matches your drive topology and controller speed. Verify your RAID card or HBA supports 12Gb/s Mini-SAS HD connectors before purchase.
Highlights
- 12 Gb/s SAS and SATA backplane keeps storage fast
- Four hot-swap trays accept 2.5" or 3.5" drives
- Two internal 2.5" bays add extra capacity
- 400 W 80+ Gold supply cuts energy waste
- 40 × 28 mm PWM fans with anti-vibration cool quietly
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 12Gb/s Mini-SAS HD backplane and which step is commonly missed?
Mount the chassis, connect the Mini-SAS HD cables to the backplane and route them to your RAID card or motherboard; the step often missed is seating each drive tray fully until the lock clicks so the 12Gb/s SAS 3.0 link trains correctly.
What maintenance will the cooling system need later?
The 40 x 28mm PWM fans are easy-swap; remove the anti-vibration pins, pull the fan module out and replace it without tools when bearings wear or airflow drops.
What limit appears first under sustained load with the 400W 80+ Gold supply?
The 400W 80+ Gold unit sets the power ceiling; continuous draw near 400W will hit the supply limit before thermal or backplane bandwidth constraints appear.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



