iMBAPrice
iMBAPrice DC Male Power Plug Pigtail Cable 5.5 mm x 2.1 mm 18AWG 12inch 20 Pack
20-pack of 12-inch 18AWG pigtail cables with 5.5 mm × 2.1 mm DC male plugs for powering CCTV cameras
- Connect cameras easily with standard 5.5 mm x 2.1 mm DC male plug
- Colour-coded red and black wires simplify positive and negative identification
- 18 AWG two-wire construction supports reliable power delivery
- Twelve-inch length bridges short camera leads to power supplies
- Twenty-piece pack covers multiple installation sites
DC Male Power Pigtail Cable 20 Pack
This pack contains twenty 12-inch DC male power pigtail cables with a 5.5 mm by 2.1 mm plug. Each cable uses 18AWG two-wire construction with red positive and black negative leads. They are designed to connect CCD or wireless cameras to a power supply. The cables also suit Siamese CCTV installations requiring a reliable patch lead.
Installers needing standard centre-positive plugs
These cables suit installers who need a standard centre-positive 5.5 mm by 2.1 mm plug for camera power connections. They are not for buyers who need a female connector or a different plug diameter. They are not for setups requiring a longer lead than the 12-inch length provided. They are not for applications demanding a wire gauge other than 18AWG.
5.5 mm by 2.1 mm centre-positive plug
The decisive specification is the 5.5 mm by 2.1 mm DC male plug with centre-positive polarity. This plug must match the camera or power supply jack exactly for a correct connection. The 18AWG wire gauge and 12-inch length are fixed for every cable in the pack. Verify the jack size and polarity on your equipment before ordering.
Highlights
- Connect cameras easily with standard 5.5 mm x 2.1 mm DC male plug
- Colour-coded red and black wires simplify positive and negative identification
- 18 AWG two-wire construction supports reliable power delivery
- Twelve-inch length bridges short camera leads to power supplies
- Twenty-piece pack covers multiple installation sites
Specifications
| Brand | iMBAPrice |
|---|
Questions about this item
Will the 5.5 mm x 2.1 mm plug on these pigtails fit the power input on my existing CCTV cameras?
The plug is a standard centre-positive 5.5 mm x 2.1 mm DC male connector, which matches the power input on most dome- and bullet-style surveillance cameras.
How can I confirm the 18AWG wires are correctly wired after I splice them to my power supply?
The red wire carries positive voltage and the black wire carries negative; apply power and measure the plug centre pin with a multimeter to verify positive polarity.
Does the 20-pack include any extra connectors, heat-shrink or tools for splicing the tinned wire ends?
The pack contains twenty 12-inch pigtails with pre-stripped tinned red and black wires; no additional connectors, sleeving or tools are included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



