IFM Efector Inc
IFM Efector Inc MK5104 T-Slot Sensor 3-Wire PNP/NPN N.O
T-slot pneumatic cylinder position sensor with GMR detection, 10-30 V DC supply, 100 mA max switching current, three-wire PNP/NPN normally-open output, -13 °F to 185 °F operating range, 1 ft lead
- MaterialHAWA
- Reliable cylinder detection with GMR sensing technology
- Flexible wiring supports both PNP and NPN inputs
- Operates from 10 to 30 V DC supply voltage
- Withstands temperatures from -13 °F to 185 °F
- Switches loads up to 100 mA maximum current
IFM MK5104 T-Slot Sensor Overview
The IFM MK5104 is a GMR-based pneumatic cylinder position sensor built for DC control circuits. It operates on 10-30V DC and provides a selectable PNP or NPN normally open output with a 100 mA maximum switching current. The three-wire design includes a one-foot lead for direct wiring into automation panels.
Suited for Direct Cylinder Mounting
This unit fits standard T-slot cylinders and handles temperatures from -13 to 185 degrees Fahrenheit without an enclosure rating. It is not intended for applications requiring an IP-rated housing, analog position feedback, or switching currents above 100 mA. Buyers needing longer cable runs or higher voltage AC operation should consider other sensor types.
One-Foot Lead Simplifies Wiring
The fixed one-foot cable reduces excess wire in tight machine frames and speeds up installation on the cylinder body. No separate connector or mounting hardware is included, so installers must supply compatible brackets and cable management. The HAWA housing material and orange-black colour coding aid visual identification during maintenance.
Highlights
- Reliable cylinder detection with GMR sensing technology
- Flexible wiring supports both PNP and NPN inputs
- Operates from 10 to 30 V DC supply voltage
- Withstands temperatures from -13 °F to 185 °F
- Switches loads up to 100 mA maximum current
Specifications
| Brand | IFM |
|---|---|
| Material | HAWA |
Questions about this item
What DC voltage supply does the MK5104 sensor need to operate?
The sensor operates on a 10-30V DC supply, so any power source within that range will work.
Can the MK5104 replace an older two-wire sensor on the same cylinder?
No, this is a three-wire PNP/NPN device and requires a separate load connection; it is not a drop-in replacement for two-wire types.
How can I verify the MK5104 is switching correctly after installation?
With the cylinder actuated, measure the output wire for a 10-30V DC signal up to 100 mA; the LED indicator will also show the switching state.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
