IDP Corp., Ltd
IDP Corp., Ltd YMCKO Color Ribbon 659366 250 Prints
Genuine YMCKO color ribbon delivers 250 prints for IDP Smart-31 and Smart-51 series printers
- Genuine IDP ribbon ensures reliable card printing
- 250 prints per roll supports high-volume output
- Compatible with Smart-31 and Smart-51 series
- Excludes Smart-30 and Smart-50 models
- Made in Japan and assembled in Korea
Genuine YMCKO Ribbon for Smart-31 and Smart-51
This genuine IDP color ribbon carries part number 659366 and yields 250 full-color prints. It is designed for the Smart-31 and Smart-51 printer series and will not function in Smart-30 or Smart-50 models. Buyers who need a ribbon for those older printers or who require a higher-capacity roll must choose a different product.
Thermal behaviour and power draw
The ribbon is a passive consumable that adds no heat, noise or electrical load to the printer. Normal operation follows the thermal profile of the host device without additional cooling or power considerations. There are no moving parts or active components that would affect acoustics or energy use.
Build quality and daily handling
Manufactured in Japan and assembled in Korea, the cartridge uses a rigid plastic housing that protects the panels during storage and installation. The keyed design prevents incorrect insertion in supported Smart-31 and Smart-51 units. Users handling the ribbon should avoid touching the print surface to maintain consistent image quality.
Highlights
- Genuine IDP ribbon ensures reliable card printing
- 250 prints per roll supports high-volume output
- Compatible with Smart-31 and Smart-51 series
- Excludes Smart-30 and Smart-50 models
- Made in Japan and assembled in Korea
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the YMCKO ribbon 659366 in my Smart-31 or Smart-51 printer without jamming the panel?
Open the printer cover, remove the old cartridge, align the new ribbon spools with the guide notches, press firmly until they click, then close the cover and run a calibration print; the step most people miss is skipping the calibration, which causes misaligned colours on the first cards.
When will I need to replace the cleaning roller that works with this 250-print ribbon?
The cleaning roller is a separate consumable; replace it every time you finish a ribbon roll or after every 250 prints to avoid dust buildup on the printhead.
What print-quality limit appears first when running large batches continuously with this ribbon?
After roughly 250 prints the ribbon is exhausted and the printer will stop; you must swap in a fresh 659366 roll before continuing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


