Ideal
Ideal 45-672 5 1/2 in Wire Stripper 30-24 AWG
Strips solid and stranded copper wire from 30 to 24 AWG with precision-ground knife-type blades and spring-return jaws
- TypeKnives, Cutters & Snips
- Strips solid and stranded wire from 30 to 24 AWG
- Precision-ground knife-type blades give clean, repeatable cuts
- Spring-return jaws speed repetitive stripping tasks
- Die-cast zinc body resists wear in daily use
- Cushioned grip reduces hand fatigue during extended work
Ideal 45-672 Wire Stripper
The Ideal 45-672 is a 5 1/2 inch hand tool designed for stripping and cutting copper cable. It suits electricians and technicians who need a compact stripper for light-gauge solid and stranded wires in the 30 to 24 AWG range. The die-cast zinc body and precision-ground knife-type blades provide durability for repetitive use. Standard cushion grips and a spring-return jaw opening reduce hand fatigue during extended tasks.
Stripping Capacity 30-24 AWG
This stripper comfortably handles solid and stranded copper wire at 24, 26, 28, and 30 AWG. Cutting capacity matches the stripping range, so the same jaws sever conductors cleanly without a separate cutter. It runs out of capacity above 24 AWG; thicker solid or stranded cables cannot be stripped or cut reliably with this tool. The fixed adjustment mechanism means no dial setting is required, but it also prevents use on gauges outside the stated range.
Manual Operation Limits
The tool relies entirely on manual force applied through standard cushion handles, so stripping speed and consistency depend on the user. Without insulated handles, it is not rated for work on live circuits. The spring-return mechanism aids repetitive motion but adds a small resistance that must be overcome on each cycle. California Proposition 65 warnings apply because the product contains chemicals known to cause cancer and reproductive harm.
Highlights
- Strips solid and stranded wire from 30 to 24 AWG
- Precision-ground knife-type blades give clean, repeatable cuts
- Spring-return jaws speed repetitive stripping tasks
- Die-cast zinc body resists wear in daily use
- Cushioned grip reduces hand fatigue during extended work
Specifications
| Brand | Ideal |
|---|---|
| Type | Knives, Cutters & Snips |
Questions about this item
Will the 45-672 stripper handle the 24 AWG solid wire I still use in older control panels?
Yes, the tool strips solid wire from 24 AWG down to 30 AWG, covering the gauge you mentioned.
How can I verify the spring-return jaws are operating correctly after first use?
Open the handles and watch the jaws snap back cleanly; they should close fully without sticking.
Does the package include replacement knife-type blades or must I order them separately?
The stripper ships with precision-ground knife-type blades installed; no extra blades are in the box.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
