Ideal
Ideal 31-063 Fish Tape 3/16 In x 100 ft Fiberglass electrician tool
A 100 ft fiberglass fish tape with a 500 lb tensile strength and non-conductive core for pulling wire through conduit near live circuits
- Non-conductive fiberglass tape for safe live-circuit pulls
- 500 lb tensile strength handles heavy wire bundles
- 100 ft length reaches long conduit runs
- 3/16 in diameter fits tight bends
- Rotating Tuff-Grip Pro case speeds deployment
Ideal 31-063 Fish Tape 100 ft
The Ideal 31-063 is a fiberglass fish tape designed for electricians pulling wire through conduit. Its non-conductive structural glass core suits work around live circuits. The 100 ft length handles long residential or commercial runs. The rotating Tuff-Grip Pro case allows smooth payout and rewind during installation.
Installing the tape and common issues
The rotating case design simplifies feeding and retrieving the tape without tangling. The metal eyelet attaches securely to wire bundles up to 10 AWG. Fiberglass can fracture if kinked sharply inside tight bends. Always inspect the tape surface for splinters before use to prevent hand injuries.
Check your setup before ordering
Verify the conduit diameter accommodates a 3/16 in round tape alongside your wire fill. Confirm the 500 lb tensile strength meets the pulling force required for your longest runs. Ensure the 12 in case diameter fits your tool storage or vehicle compartment. The tape supports wire gauges from 24 AWG to 10 AWG.
Highlights
- Non-conductive fiberglass tape for safe live-circuit pulls
- 500 lb tensile strength handles heavy wire bundles
- 100 ft length reaches long conduit runs
- 3/16 in diameter fits tight bends
- Rotating Tuff-Grip Pro case speeds deployment
Specifications
| Brand | IDEAL |
|---|
Questions about this item
How can I confirm the 500 lb tensile strength is holding during a pull?
The structural glass core resists stretching; if the tape feeds smoothly through the rotating Tuff-Grip Pro case without kinking or snapping under load, it is performing to its rated strength.
What components are included and what must I supply separately?
The package contains the 100 ft fiberglass tape with a metal eyelet housed in a 12 in diameter Tuff-Grip Pro case; you must provide the wires (24 AWG to 10 AWG) and any pulling lubricant.
Which tape diameter suits conduit runs needing non-conductive pulling?
The 3/16 in diameter fiberglass tape is non-conductive and rated for live-circuit work, making it the correct choice when insulation from energised conductors is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
