Ideal
Ideal 31-010 Hand Tool 1/8 In x 50 ft Blued Steel Fish Tape
A 50 ft blued steel fish tape with laser-etched 12 in markings and a non-oily, rust-resistant finish
- TypeFishing Tapes, Sticks & Lines
- Laser-etched 12-inch markings for accurate wire-run measurement
- 1/8-inch by 50-foot blued steel tape for long, stiff pulls
- Non-oily finish resists rust and oil stains indoors or outdoors
- 045-inch thickness adds rigidity for extended conduit runs
- Thumb-winder case with 7-inch diameter keeps tape coiled and ready
1/8 Inch by 50 ft Blued Steel Fish Tape
The Ideal 31-010 is a blued steel fish tape designed for pulling wires through conduit and raceways. Its 1/8 inch width and 50 foot length suit long runs where added stiffness helps push through bends. Laser-etched markings at 12 inch increments let you measure the run as you feed the tape. The non-oily finish resists rust and oil stains for indoor or outdoor jobs.
Thumb Winder Case and Stiffness
The tape ships in a 7 inch diameter thumb winder case that keeps the coil contained during storage and deployment. Because the steel is stiffer than non-metallic alternatives, it tracks straighter in long straight sections but requires more force to navigate tight bends. Kinking the tape near the end can make it difficult to rewind smoothly, so feed steadily and avoid sharp angles.
Conduit Size and Run Length
Verify that the conduit inside diameter can accommodate a 1/8 inch wide tape with a .045 inch height, especially where multiple cables already occupy the raceway. Confirm the total pull distance does not exceed 50 ft, as the tape cannot be joined to another length. Check local regulations for the California Proposition 65 warnings on the product label before use.
Highlights
- Laser-etched 12-inch markings for accurate wire-run measurement
- 1/8-inch by 50-foot blued steel tape for long, stiff pulls
- Non-oily finish resists rust and oil stains indoors or outdoors
- 045-inch thickness adds rigidity for extended conduit runs
- Thumb-winder case with 7-inch diameter keeps tape coiled and ready
Specifications
| Brand | IDEAL |
|---|---|
| Model | 31-010 |
| Type | Fishing Tapes, Sticks & Lines |
Questions about this item
How do I verify the 1/8 in x 50 ft blued steel fish tape is feeding correctly after setup?
Extend the tape fully and confirm the laser-etched 12 in markings are visible and sequential; the non-oily finish should slide smoothly through conduit without binding or leaving residue.
What comes in the box with the IDEAL 31-010 and what must I purchase separately?
The package includes the 50 ft blued steel tape with laser-etched 12 in increments housed in a 7 in diameter thumb winder case; no additional accessories are included, so wire-pulling lubricant or connectors are separate purchases.
Which version of the 31-010 fish tape should I choose for stiff, long conduit runs?
The 1/8 in wide x 0.045 in high blued steel tape is the single listed version; its stiffness suits long runs, and the 50 ft length with 12 in laser-etched markings covers typical residential and commercial pulls.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
