Ideal
Ideal 300110175 T-Bolt Hose Clamp 1-3/4 in min SAE 28 PK5
Stainless-steel T-bolt clamp adjusts from 1-3/4 in to 2 in and installs at 75 in-lb, sold in a pack of five
- TypeClamps
- Stainless steel band resists corrosion with 301 grade material
- T-bolt design provides secure sealing at 75 in-lb torque
- 3/4 inch band width distributes pressure evenly across hose
- SAE 28 sizing fits 1-3/4 to 2 inch diameters
- Pack of 16 clamps supplies multiple connection points
T-Bolt Hose Clamp Pack of Five
This pack contains five Ideal T-bolt hose clamps designed for secure hose connections. Each clamp uses a stainless steel band and screw for corrosion resistance. The T-bolt mechanism applies even pressure around the hose circumference. They suit automotive, industrial and marine fluid systems.
Suits 1-3/4 in to 2 in hose IDs
These clamps fit hoses with inside diameters between 1-3/4 in and 2 in. The 3/4 in wide band and 75 in-lb install torque handle high-vibration joints. Buyers needing smaller or larger diameter ranges should look at other sizes. The SAE 28 designation confirms the clamping range for specification-driven purchases.
SAE 28 size with 301 stainless band
The clamp carries SAE number 175, which corresponds to the SAE 28 size range. Band material is grade 301 stainless steel at 0.025 in thickness. Screw and housing use grade 304 stainless steel. A 7/16 in hex drives the T-bolt for installation with standard tools.
Highlights
- Stainless steel band resists corrosion with 301 grade material
- T-bolt design provides secure sealing at 75 in-lb torque
- 3/4 inch band width distributes pressure evenly across hose
- SAE 28 sizing fits 1-3/4 to 2 inch diameters
- Pack of 16 clamps supplies multiple connection points
Specifications
| Brand | Ideal |
|---|---|
| Model | 300110175 |
| Type | Clamps |
Questions about this item
What SAE size does the 300110175 clamp cover, and what is its minimum inside diameter?
The clamp is SAE 28 and fits a minimum inside diameter of 1 3/4 in.
What hex size is needed to torque the T-bolt to the specified 75 in-lb?
A 7/16 in hex driver or socket is required for installation.
How do you correctly tighten the stainless-steel T-bolt to 75 in-lb without over-stressing the band?
Use a torque wrench set to 75 in-lb on the 7/16 in hex head; stop when the wrench clicks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
